Product Name: Aoip IND 43 Safety ohmmeter on Pyrotechnical Elements
Brand: Aoip
Product Code: IND 43
Tags: Aoip
IND 43 on Pyrotechnical Elements
Aoip Safety ohmmeter on Pyrotechnical
43 Safety Elements
Aoip 43 Elements
IND Safety on Elements
IND 43 Pyrotechnical Elements
43 ohmmeter Pyrotechnical Elements
43 Safety ohmmeter Pyrotechnical Elements
Aoip IND 43 ohmmeter on Elements
43 Safety on Elements
Safety ohmmeter
Aoip IND 43 Safety on Pyrotechnical Elements
ohmmeter on Pyrotechnical
IND 43 ohmmeter Pyrotechnical
Aoip 43 on Pyrotechnical
IND on
43 Safety ohmmeter on Elements
IND 43 Safety on Elements
Safety ohmmeter on Pyrotechnical Elements
Are you interested in the product Aoip IND 43 Safety ohmmeter on Pyrotechnical Elements from manufacturer Aoip with code IND 43? Contact us now and get offer. Imtek Engineering, the fastest and most reliable industrial equipment supplier in the world, will offer you the best offer!
Get Offer With E-Mail: info@im-tek.com
Get a offer for Aoip IND 43 Safety ohmmeter on Pyrotechnical Elements from our live support team now!
This safety ohmmeter was developed to carry continuity and isolation measurements on pyrotechnical elements where user safety is at stake.Two types of conditions define the user safety:Measurement conditions:Measuring current much lower than the current of non-fireConnection to the test line only for the activated period of measurementDischarge of residual electrical chargesSafety conditions:No overshoot of maximum current even in case of instrument failure (electronics breakdown, internal short-circuit…)Permanent self-checking of the instrument internal functions before connection to measurement channelMeasurement principleThe ohmmeter function is based on 4 wire measurement, which makes it possible to be freed from parasitic line resistance. The principle relies on an internal device of permanent self-calibration which guarantees, over a short and long-term period of time, the high reliability of the measurements carried out by continuously correcting the drifts of gain and offset. Measurements start with an external input signal. The result of the measurement is internally processed to supply information whether the measured value is within tolerance limits set by the operator.All parameter settings are entered by keyboard with a locking of the parameters by key. Our units are equipped with dry contact output and S232 connection that allows process automation and implementation of traceability.On request, our existing products can be adapted to your specific requirements: Adapted protocole RS232, other testing voltage or measuring current, integration, processing software...Two switching units (INT 17 and INT 17 HT for high testing voltage) are also available in option to interface the devices under test (initiators, airbags…) with IND pyrotechnical ohmmeters / megohmmeters. The contact switches are usually monitored by shared automation (0 24 V) and earth bounding control (contact or transistor). Automation inputs are protected against any change of polarity.Large applications:Automotive airbag inflator / electrical module functional testsSeatbelt pre-tensioner actuator / electrical module functional testsHigh speed parallel soak dual inflator or dual test station electrical seekMulticontact / switch dry circuit continuity and leakage resistance measurementsAutomotive power / fuse center continuity and leakage characterizationPCB / PWB and general purpose short/open circuits testingTechnical support:Our technical staff can support you:Commissioning of your equipmentManagement of units evolution (number and functional needs)On site breakdown servicingUnit integration on test benchOn site investigation of any measurement issues Yearly calibration is highly recommended in order to control the safety functions of your equipment.