Aron AM5QFABC005 VALF

AM.5.QF... MODULAR
FLOW REGULATOR CETOP 5
AM.5.QF...
SCREWS AND STUDS
CH. IV PAGE 35
AM.5.QF type one way non-compensated throttle valve are fitted with an O-Ring mounting plate which allows
its assembly for either input or output regulation. Adjustment is obtained by
means of a grub screw or a plastic knob. They are available in the four regulating configurations shown in the
hydraulic diagrams.
These valves are supplied with related hydraulic scheme. In case of inversion
of rated flow direction, turn valve 180° right or left (attention: in this case the
label will appear upside down with A and B inverted).
Max. operating pressure 350 bar Max. pressure adjustable 250 bar Flow rate regulation
on 9 screw turns Max. flow 80 l/min Hydraulic fluids Mineral oils DIN 51524
Fluid viscosity 10 ÷ 500 mm2/s Fluid temperature -25°C ÷ 75°C Ambient temperature
-25°C ÷ 60°C Max. contamination level class 10 in accordance with NAS 1638 with filter ß25≥75
Weight 3,7 Kg
ORDERING CODE
QF
CETOP 5/NG10 Non compensated throttle valve
**
Control on lines A / B / P / AB
*
Type of adjustment M = Plastic knob C = Grub screw
**
4
TOWARDS CHECK VALVE
00 = No variant V1 = Viton
Δp (bar)
5
Modular valve
Δp (bar)
AM
FREE FLOW
FLOW RATE
Q (l/min)
Q (l/min)
HYDRAULIC SYMBOLS
Serial No.
AM.5.QF.A
AM.5.QF.B
AM.5.QF.P
AM.5.QF.AB
OVERALL DIMENSIONS K = OR plate
C
Type of adjustment M Plastic knob C
Grub screw
M
Support plane specifications
File: AM5QF004_E
IV • 31
01/2000/e
4