Bartec 07-2911-13302000 Switch

03-0330-0160/B-08/2020-ESS-129312
Position switch Aluminium Explosion protection Marking Position switch type 07-2511
ATEX
Ex II 2G Ex db IIC T6, T5 Gb Ex II 2D Ex tb IIIC T80°C, T95°C Db
Certification
EPS 14 ATEX 1766 X
IECEx
Ex db IIC T6, T5 Gb Ex tb IIC T80°C, T95°C Db
Certification
IECEx EPS 14.0092 X
Other approvals and certificates, bartec.com
Operating temperature
-50 °C to +100 °C depending on the model and the materials used
Ambient temperature
T6 to max. +75 °C depending on the rated current
Technical data Electrical data according to
DIN EN 60947-5-1
Rated operating voltage AC 400 V Utilisation category AC-15 4A 250 V AC-15
2A 400 V DC-13 0.15 A 250 V Isolation voltage 400 V
Ambient temperature +40 °C
400 V 250 V 30 V
ohmic load 3A 5A 7A
inductive load cosφ = 0.6 2A 3A 5A
250 V 30 V
ohmic load 0.4 A 7A
inductive load L/R = 3μs 0.03 A 5A
AC switching capacity
– Dimensions and mounting dimensions according to DIN EN 50041
– Compatible with non-Ex DIN limit switches
DC switching capacity
– Different switching elements All dimensions and actuating elements of the Ex d position
switch correspond to the DIN EN 50041 standard. Its 30 x 60 mm mounting dimensions make the switch directly compatible
to the position switch corresponding to the same DIN standard.
The switch is equipped with snap-action contacts with several switching element versions. A microswitch with connection
cable Type 07-2511 is mounted as switching element. Different actuators are available for the variety of actuating possibilities.
After the removal of four screws these knobs can be rotated by 90 °C allowing four different directions of actuation. Goldplated contacts are available for the switching of low currents
of voltages. Standard length of the connection cables are 3 m.
BARTEC has designed a very extensive range of Ex e terminal boxes of polyester and aluminium for the connection of the
position switch within the Ex area.
BARTEC GmbH Max-Eyth-Str. 16 97980 Bad Mergentheim
Tel.: +49 7931 597 0 Fax: +49 7931 597 119
Further electrical data on request.
Switching elements
see table
Max. switching frequency
1000 h
Mechanical life
>2 x 106 switching cycles depending on plunger operating speed and angle
Electrical life
dependent on load
Electrical connection
Lead 0.75 mm2 HO5VV-F/A05VV-F/ BETAflam
Other cores and leads on request.
Enclosure material
Mail: [email protected] Web: bartec.com
aluminium