Bartec 07-5195-36016090

Line bushings with terminals
Dimensions mm
Dimensions mm
28
Ø 46 (690 V) Ø 52 (1000 V) Ø 39
Ø 40 (690 V) Ø 46 (1000 V) Ø 33
3 21 29
60 1 3
21 29
3 4
Additional marker
60
28
Additional marker
690 V and 1 000 V
2
m1 m2
m1
M24 x 1.5
M33 x 1.5
M42 x 1.5
m2
Ø 30
Ø 36
Ø 44
6
1
2
5
4
3
690 V and 1 000 V
m1 m2
m1
M38 x 1.5
M42 x 1.5
m2
Ø 40
Ø 44
Ordering information Cores Rated insulation voltage
No. of terminals/ cores
Conductor cross section (mm2)
Rated current (A) for continuous operation (reference values) 1) Max. permissible operating temperature at the conductor
is +110 °C Max. current-carrying capacity based on VDE 0298-4 Table 11, Gap 2
Thread size
Order no.
Core length please specify in plain text
690 V
4
0.75 1.5 2.5 4
4
0.75 1.5 2.5 4 6
4
0.75 1.5 2.5 4 6
6
0.75 1.5 2.5 4 6
6
0.75 1.5 2.5 4 6
4
1.5 2.5 4 6
11 A 17 A 23 A 31 A 11 A 17 A 23 A 31 A 40 A 11 A 17 A 23 A 31 A 40 A 11 A
17 A 23 A 31 A 40 A 11 A 17 A 23 A 31 A 40 A 17 A 23 A 31 A 40 A
M24 x 1.5 M24 x 1.5 M24 x 1.5 M24 x 1.5 M33 x 1.5 M33 x 1.5 M33 x 1.5 M33 x 1.5
M33 x 1.5 M42 x 1.5 M42 x 1.5 M42 x 1.5 M42 x 1.5 M42 x 1.5 M38 x 1.5 M38 x 1.5
M38 x 1.5 M38 x 1.5 M38 x 1.5 M42 x 1.5 M42 x 1.5 M42 x 1.5 M42 x 1.5 M42 x 1.5
M33 x 1.5 M33 x 1.5 M33 x 1.5 M33 x 1.5
07-9304-F042 07-9304-H042 07-9304-J042 07-9304-K042 07-9304-F043 07-9304-H043
07-9304-J043 07-9304-K043 07-9304-L043 07-9304-F046 07-9304-H046 07-9304-J046
07-9304-K046 07-9304-L046 07-9304-F065 07-9304-H065 07-9304-J065 07-9304-K065
07-9304-L065 07-9304-F066 07-9304-H066 07-9304-J066 07-9304-K066 07-9304-L066
07-9306-H043 07-9306-J043 07-9306-K043 07-9306-L043
4
1.5 2.5 4 6
17 A 23 A 31 A 40 A
M42 x 1.5 M42 x 1.5 M42 x 1.5 M42 x 1.5
07-9306-H046 07-9306-J046 07-9306-K046 07-9306-L046
6
1.5 2.5 4
17 A 23 A 31 A
M38 x 1.5 M38 x 1.5 M38 x 1.5
07-9306-H065 07-9306-J065 07-9306-K065
6
1.5 2.5 4 6
17 A 23 A 31 A 40 A
M42 x 1.5 M42 x 1.5 M42 x 1.5 M42 x 1.5
07-9306-H066 07-9306-J066 07-9306-K066 07-9306-L066
1 000 V
1)
6
When determining the maximum current-carrying capacity of the connection cores, the self-heating and enclosure heating at the site of installation at the maximum permissible
ambient temperature must be assumed. The maximum tightening torque for the terminal screw is 0.8 Nm.
Other equipment options and special sleeves on request.
It is essential to submit a customer requirements form which has been filled in correctly and completely.
The form can be found in the catalogue at the end of the chapter.
Technical data subject to change without notice.
03-0330-0181-10/2017-BCS-200637/8 BARTEC
205