قطع غيار صناعية وحلول هندسية منذ 2001.
Buhler GAS 222.11 Sample Gas Probe
أوراق البيانات الفنية / وثائق المنتج
تواصل معنا! 24 ساعة عمل (باستثناء عطلات نهاية الأسبوع والعطلات الرسمية) لتأكيد حالة المخزون ووقت التسليم المتوقع.
وصف المنتج
يتم توريد منتجات Bühler، بما في ذلك Buhler GAS 222.11 Sample Gas Probe، عبر قنوات الاستيراد الموازي وتسليمها إلى عملائنا في United States بسرعة وموثوقية. تقدم Imtek Engineering قطع Bühler الأصلية بأسعار تنافسية. حتى لو لم يكن Buhler GAS 222.11 Sample Gas Probe مدرجًا في موقعنا، يمكنك طلب عرض سعر في أي وقت وسيرد فريقنا عليك في أقرب وقت ممكن.
United States- Unheated
- Base unit with manual shut-off valve
- For in-situ and outlet filter
- With blowback connection
- The outlet filter can easily be removed by turning the handle 90°.
- For dust loads up to 2g/m³, non-condensable gases. Combined with inlet filter up to 10g/m³ and higher
- Including flange seal and screws
The probe has no innate ignition source and is therefore suitable for use in Ex areas.
The base unit becomes functional by adding accessories suitable for the application.
These include:
- Sampling tubes
- Unheated extensions
- Inlet filter
- Outlet filter
- Calibrating gas connection
- ANSI adapter flange
- Pneumatic drive
- Shut-off valve
- Blowback
- Blowback control
Technical Data Gas Probe Technical Data Probe operating temperature:
max. 200 °C
Ambient temperature without accessories:
-20 to +70 °C
Ambient temperature with accessories:
Component
Ambient temperature range
Compressed air valve:
-10 °C < Tamb < +55 °C
Pneumatic drive:
-20 °C < Tamb < +80 °C
Limit switch:
-20 °C < Tamb < +100 °C
Solenoid valve for pneumatic drive:
-10 °C < Tamb < +55 °C
Component
Medium temperature range
Compressed air valve:
-10 °C to +80 °C
Solenoid valve for pneumatic drive:
-10 °C to +100 °C
Medium temperature (blowback):
Regulator setting range:
+50 to +200 °C
Low/high temperature alarm:
Alarm adjustable ±5.....30 K from setpoint, factory preset to 15 K, max. switching
current 1 A
Electrical data:
230 V, 2.0 A, 50/60 Hz 115 V, 3.8 A, 50/60 Hz
Protection class:
IP54
Max. operating pressure:
6 bar
Materials in contact with media Flange:
Probe body:
Ball valve:
Seal:
Stainless steel 1.4571 Stainless steel 1.4571 Stainless steel 1.4408/1.4462/PTFE
Stainless steel 1.4404/graphite/and see filter Optional coating with SilcoNert® 2000 *
*The SilcoNert® 2000 coating forms a layer of hydrogenated, amorphous silicon on the surfaces of the measuring gas probe that
are in contact with media. It is applied by chemical vapour deposition (CVD), which creates a uniformly thin layer on the surface.
SilcoNert® 2000 is temperature-resistant up to 400 °C, chemically inert and hydrophobic. The coating is resistant to many chemically corrosive liquids. If you are unsure about the suitability for specific gas matrices, please contact Bühler Technologies
GmbH.
2
Bühler Technologies GmbH
We reserve the right to amend specification.
DE461021 ◦ 01/2026
الأسئلة الشائعة
أسئلة شائعة حول Buhler GAS 222.11 Sample Gas Probe من Bühler. شركة Imtek Engineering مستعدة لمساعدتك في الحصول على Buhler GAS 222.11 Sample Gas Probe من Bühler في United States.
تحصل Imtek Engineering على منتجات Bühler الأصلية من خلال قنوات توريد موثوقة وتقدّمها للعملاء في United States بأسعار تنافسية.
