قطع غيار صناعية وحلول هندسية منذ 2001.
Celem MT SERIES Matching Transformers
أوراق البيانات الفنية / وثائق المنتج
- لا تتوفر وثائق فنية لهذا المنتج في الوقت الحالي. تواصل معنا للحصول على مزيد من المعلومات.
تواصل معنا! 24 ساعة عمل (باستثناء عطلات نهاية الأسبوع والعطلات الرسمية) لتأكيد حالة المخزون ووقت التسليم المتوقع.
وصف المنتج
يتم توريد منتجات Celem، بما في ذلك Celem MT SERIES Matching Transformers، عبر قنوات الاستيراد الموازي وتسليمها إلى عملائنا في United States بسرعة وموثوقية. تقدم Imtek Engineering قطع Celem الأصلية بأسعار تنافسية. حتى لو لم يكن Celem MT SERIES Matching Transformers مدرجًا في موقعنا، يمكنك طلب عرض سعر في أي وقت وسيرد فريقنا عليك في أقرب وقت ممكن.
The MT series creatively addresses the key characteristics of high quality matching transformers for high frequency / high power applications.
- The skin effect in the MT is negligible due to its unique laminar structure. Instead of the traditional copper tubes, the MT winding is made of laminar copper sheets. At 350 kHz this revolutionary structure reduces resistive losses by a factor of 10, and consequently increases overall efficiency to above 90%.
- The coupling coefficient of the MT is exceptionally high. Using alternating primary and secondary layers of thin copper sheets creates unprecedented coupling and very low reactive losses. The MT was designed to achieve zero stray inductance. This advanced design results in short circuit voltage of less than 10%, so that over 90% of the available reactive power is transmitted to the load.
- The MT completely avoids de-rating of specification when tapped, through an innovative yet simple combination of identical coil elements that are connected in series and parallel. This enables the transformation ratio to be modified quickly and without power reduction.
- The frequency range of the MT is exceptionally wide: 5 – 350 kHz. This is made possible by practically eliminating stray inductance, as well as by using high saturation ferrite.
| TYPE | MT 250 | MT 300 | MT 500 | MT 1000 | ||||||||
| Dimensions (L x W x H) | mm | 287.5 x 228 x125 | 287.5 x 228 x170 | 287.5 x 228 x170 | 287.5 x 228 x 260 | |||||||
| Weight | kg | 18 | 22 | 26 | 45 | |||||||
| Tapping | ratio | 3:1 | 4:1 | 2:1 | 6:1 | 3:1 | 2:1 | 12:1 | 6:1 | 4:1 | 3:1 | 2:1 |
| Max Primary voltage | Vrms | 600 | 800 | 1200 | 1200 | |||||||
| Max secondary current | A | 1500 | 2000 | 3000 | 6000 | |||||||
| Max primary current | A | 500 | 500 | 1000 | 500 | 1000 | 1500 | 500 | 1000 | 1500 | 2000 | 3000 |
| Reactive power transfer | % | > 90% | > 90% | > 90% | > 90% | |||||||
| Active efficiency | % | > 95% | > 95% | > 95% | > 95% | |||||||
| Max power | kVA | 250 | 300 | 500 | 1000 | |||||||
| Stray inductance | ?H | < 0.2 | < 0.3 | < 0.4 | < 1.5 | |||||||
| Frequency range | kHz | 20 - 350 | 20 - 350 | 20 - 350 | ||||||||
الأسئلة الشائعة
أسئلة شائعة حول Celem MT SERIES Matching Transformers من Celem. شركة Imtek Engineering مستعدة لمساعدتك في الحصول على Celem MT SERIES Matching Transformers من Celem في United States.
تحصل Imtek Engineering على منتجات Celem الأصلية من خلال قنوات توريد موثوقة وتقدّمها للعملاء في United States بأسعار تنافسية.

