Dynisco Atc990200110000 Process Controller

1/4 DIN Auto-Tuning Control and Display of Process or Differential Pressure
Mechanical & Packaging Characteristics Termination:
Front Panel:
Operating Temp:
Storage Temp:
Humidity:
Weight:
Screw terminals on rear IP65 with gasket (IP65 front USB connector) 32 to 122°F (0 to 50°C)
-4 to 158°F (-20 to 70°C) 85% relative humidity, non-condensing 1.43 lbs. (650g)
Approvals & Certifications
CE Mark:
Agency Approvals:
Self-certified to applicable standards UL
Power Supply (Mains) Input Power Mains Version:
Low Voltage Version:
Power Consumption:
Transmitter Power Supply:
100 to 240Vac, 50/60Hz switching 20 to 48 Vac 50/60Hz 25VA or 22 to 65Vdc 12W
15VA, max 24Vdc into 400Ω min, 60mA drive for 2-or 4-wire mA transmitters
Ordering Guide ATC990-X-X-X-X-X-X-X-X-X (Includes Retransmission) Relay/Alarms
0 = No Relays 2 = Dual Relays Independent Common 3 = 3 Single Relays 4 = 3 Relays (1 Single, 1 Dual – shared common)
Input Voltage 0 = 100 to 240Vac 1 = 24Vac/DC Data Logger, Real Time Clock and USB*
0 = Not Installed 1 = Installed *Includes USB
2nd Input/Setpoint 0 = Not Installed 1 = Installed
USB w/USB Memory Stick* 0 = Not Installed 1 = Installed *Not required with Data logger
Communications 0 = No Comms 1 = RS-485 ModBus 2 = Ethernet ModBus TCP 24 V Transmit Power Supply
0 = Not Installed 1 = Installed – Use with relay options 0, 2 or 4 only
Retransmission 1 = Installed
Digital Inputs 0 = Not Installed 1 = Installed