Gemu 1436000Z1SA010001090 Positioner

21 Technical data
General information
Electrical data
Protection class to EN 60529 IP 65 Weight approx. 600 g Dimensions L x W x H
See dimensional drawing Installation position Optional Directives
EMC Directive 2014/30/EU Particulars Fail safe function in case of compressed air or power supply
failure (see table on page 59)
Power supply Power supply Uv = 24 V DC +10 % / -5 % Duty cycle continuous duty
Reverse battery protection yes Current consumption for flow rate code 01, 02
Ityp = 140 mA (@ 24 V DC) for flow rate code 03 Ityp = 175 mA (@ 24 V DC)
Input signals Analogue inputs Set value / actual value 0/4 - 20 mA (selectable)
Input resistance 120 Ω (for device version code PA01) Accuracy / Linearity
± 0.3 % of full flow Temperature drift ± 0.3 % of full flow Resolution 12 bit
Reverse battery protection yes Overload proof yes (up to ± 24 V DC) Travel sensor input*
External travel sensor input 0…10 V DC (for travel length code S01) Supply voltage output UP+ typ. 10 V DC
Short-circuit proof:
yes Resistance range ext. potentiometer 1…10 kΩ Input voltage range 0… UP+
Accuracy / Linearity ± 0.3 % of full flow Temperature drift ± 0.3 % of full flow
Resolution 12 bit Overload proof yes (up to ± 24 V DC)
Operating conditions Ambient temperature Storage temperature Control medium
Dust content Pressure dew point Oil concentration Air supply Air consumption
Air output
0 ... +60 °C 0 ... +60 °C Quality classes to
DIN ISO 8573-1: 2010 ≤ 10 mg/m³/particle size ≤ 40 µm (class 7) ≤ +3 °C (class 4)
≤ 5 mg/m³ (class 4) 1.5 ... 7 bar 0 l/min (when idle) 150 / 200 / 300 l/min
depending on version
Materials
Housing cover Housing base
Travel sensor Linear design Stroke Resistance R Minimum stroke
PSU
PP 30 integrated in directly mounted version
* Travel sensor input galvanically isolated from supply voltage, not galvanically isolated from the set value/actual value inputs
and actual value output.
0-30 / 0-50 / 0-75 mm 3 / 5 / 5 kΩ ≤ 8 % of the travel length ≥ 1 % of the travel length
Digital inputs Function selectable via software (DigIn 1; DigIn2; DigInW; DigInX) (Reference: GND X1:3)
Voltage 24 V DC Logic level "1" >14 V DC Logic level "0" < 8 V DC Input current
typ. 2.5 mA DC (at 24 V DC) Output signals Analogue outputs Actual value
4…20 mA Output type active Accuracy ± 1 % of full flow Temperature drift
±0.5 % of full flow Load resistor 600 Ω Resolution 12 bit Overload proof
yes (up to ± 24 V DC) Short-circuit proof yes Digital outputs Switching output K1/K2 selectable via software
Type of contact PNP Switching voltage Power supply Switching current 0.5 A
Drop voltage max. 2.5 V DC at 0.5 A Overload proof yes (up to ± 24 V DC)
Short-circuit proof yes Pull down resistance 120 kΩ
Quarter turn design Angle of rotation 0-93° Resistance R 3 kΩ
Controller data Positioner System deviation
1 % (factory setting) ≥ 0,1 % (can be set) ≤ 2,0 % (factory setting, K-no. 2442)
≤ 5,0 % (factory setting, K-no. 2443) adjustable automatic or manual
PD parameters Initialisation Process controller can be connected (version PA 01)
Controller type continuous controller
PID parameters adjustable Parameterisation at the device: Menu selection
context sensitive or help texts at the PC: Internet MS Internet Explorer
Operating and display elements Text display Alphanumeric, 2-line display with 16
digits each with background light
LED front, top Status, for Profibus-DP and DeviceNet and Profinet option
LED front, bottom Status, for Profinet option Keys 4 membrane protected fascia keys
Interfaces RS232 Parameterisation via web browser Profibus DP Parameterisation / process data
Transmission rates 9.6k /19.2k / 45.45k / 93.75k / 500k 1.5M / 3M / 6 M / 12 M Baud
DeviceNet Parameterisation / process data Transmission rates 125k / 250k / 500k Baud
Profibus DP Parameterisation / process data Transmission rates 100 M Baud
1436 cPos
Functions
- Positioner + process controller combined and synchronized with each other
- Automatic or manual optimizing initialisation
- Multiple point calibration for optimized valve control
- Diagnostics, alarm messages
- Operation possible when controller is active
- 3 parameter sets can be saved and reloaded
- 3 user levels (access authorization)
- Operating hours counter, event list (for details see operating instructions)
- Digital inputs (option) for variable function control for automation
50 / 66