Gestra Ks92-1 Microprocessor

Data sheet 818555-01 Ausgabe: 05/10
Self-Tuning Universal Controller
KS 92-1
Description
Voltage / Current
The universal controller is suitable for single closed-loop control systems and for automating industrial processes. The
equipment is highly flexible and an economical and efficient solution for many industrial applications. The controller is self
tuning during start-up and to the setpoint. An optional serial interface RS 422/485 is also available. The configuration
and para­mete­ri­zation data are stored in an EEPROM. The user-friendly three-line alphanumeric “day & night” display
enables convenient menu-driven operation on site of the controller by entering the configuration and parameter
settings in accordance with the existing operating conditions and requirements.
Function Continuous controller
PID controller Proportional band Xp:
1 to 9999 Integral time Ti [s]:
0.1 to 9999 s Derivative time Td [s]:
0.1 to 9999 s Switching controller 2 position (on-off) or 3 position stepping controller
The universal controller KS 92-1 is self optimizing, which means that the equipment itself tunes the optimum control
parameters to the setpoint.
Design Controller case in accordance with DIN 43700 for panel mounting and installation in control cabinets.
Wiring via screw-type terminals on back of housing.
For conductor cross-section from 0.5 to 2.5 mm2.
Input resistance Range
Direct voltage
Direct current
110 kΩ
20 Ω
DIN IEC 381 0/4 – 20 mA
0 – 10 V
Pt 100 For Pt 100 sensors to DIN 43760 and for three-wire connections Measuring range: –200 °C up to 850°C
Measured current: max. 0.2 mA Display error: ≤ 1 K Monitoring for break in sensor or short circuit with
­indication on display, output of a safety value Lead resistance: max. 30 Ω/ lead
Logic input 2 logic inputs via volt-free contacts.
Configurable for the following functions:
interlocking operation, immobilisation of manual button, resetting saved alarms, switching to external setpoint,
manual operation Controller input 2 External setpoint or position feedback
Setpoint 1 internal and 1 external setpoint: mA or V Function: fixed setpoint controller or fixed setpoint ­
follow-up controller Front interface Connection at the front of the equipment via PC adaptor
cable (optional). Thanks to the BlueControl software the
KS 92-1 can be configured, parameterized, commissioned and operated manually.
Output
Technical Data
Relays 2 volt-free changeover contacts, output 1 and 2, switching capacity: 250 V, 2 A, resistive, 500 VA
Servomotor, output 3 and 4, switching capacity 250 V, 2 A, resistive, 500 VA
Inputs Controller input 1 Thermocouples Type
°C range
B
0/1820
C
0/2315
D
0/2315
E
–100/1000
L
–100/900
J
–100/1200
K
–100/1350
N
–100/1300
R
0/1760
S
0/1760
T
–200/400
Internal temperature compensation Max. additional error: ± 0.5 K Input impedance: ≥ 1 kΩ
Sensor break detection indicated on display, output of a safety value or detection of
control output
Note When connecting inductive loads, e. g. control contactors, make sure that the contactors are provided with RC
suppressor circuits according to the specification of the manufacturers of the contactors in order to prevent high
voltage spikes.
Current 0/4 – 20 mA max. load ≤ 500 Ω, output 4 Voltage 0/2 – 10 V configurable, load ≥ 2 kΩ, output 4
Alarm / Limit values 2 volt-free changeover contacts for upper and lower
limit (absolute band and deviation alarm) with adjustable hysteresis Switching capacity: 250 V, 2 A, resistive
Transmitter supply 18 V DC ± 20 %, not insulated max. current 22 mA, max. load 600 Ω
Display
LED display: alphanumeric, three-lines “day & night” display, showing process values numerically or as a bar
graph, with additional elements Settings Configuration, parameterization and operation via
keyboard, menu-driven.
P. T. O.