EASYBus - sensor modules for temperature (measuring range: -50.0 ... +150.0 ° C)
DESIGN:
EBT-AP3:
Room or outdoor sensor for direct wall mounting (painting of electronics required for outdoor use).
TECHNICAL SPECIFICATIONS:
Measuring range:
-50.0 ... +150.0 ° C or -58.0 ... +302.0 ° F Sensor
element:
Resistance thermometer Pt1000 according to DIN IEC 751
Resolution:
0.1 ° C / 0.1 ° F
Accuracy (electronics):
(at nominal temperature = 25 ° C) ± 0.2% of the measured value ± 0.2 ° C
Sensor accuracy:
(Pt1000)
Standard:
according to DIN class B (± 0.3 ° C at 0 ° C)
Option:
DIN class AA: ± 0.1 ° C at 0 ° C
Electrical connection: Angle connector
EN 175301-803 / A (IP65), output 2- wire connection , max. 1.5 mm2 each, reverse polarity -free Sensor connection
:
2-wire connection possible (e.g. EBT-AP5)
Ambient temperature (electronics):
-25 ... +70 ° C
Installation position:
any
Fastening:
Either via screw thread or via fastening holes in the housing (
accessible after removing the cover )
Fastening distance:
50 x 70 mm
Fastening screws:
max. Shaft diameter: 4 mm
Sensor installation:
sensors are always installed potential-free
Thread sizes G:
1/2 “(standard) Material V4A
Housing:
Material: ABS, protection rating: IP65
Dimensions:
82 x 80 x 55 (L x W x H)
Scope of delivery:
device, operating manual
Standard:
FL = 50 mm
D = 3 mm
