Ropex RES-406 740602 Temperature Controller

Technical data
9
Technical data
Type of construction
Housing for installation in the electrical cabinet Snaps onto a standard top hat rail (DIN TS35 rail, 35 mm) acc. to DIN EN 50022
Dimensions: 90 x 75mm; height: 135mm (incl. terminals)
Line voltage
All controllers manufactured as of February 2006:
115VAC version: 110VAC -15%…120VAC +10% (equivalent to 94…132VAC) 230VAC version: 220VAC -15%…240VAC +10% (equivalent to 187…264VAC)
400VAC version: 380VAC -15%…415VAC +10% (equivalent to 323…456VAC) All controllers manufactured as of January 2004 up to January 2006:
115VAC version: 115VAC -15%…120VAC +10% (equivalent to 98…132VAC) 230VAC version: 230VAC -15%…240VAC +10% (equivalent to 196…264VAC)
400VAC version: 400VAC -15%…415VAC +10% (equivalent to 340…456VAC) All controllers manufactured up to December 2003:
115VAC, 230VAC or 400VAC, tolerance: +10% / -15% depending on version selected ( section 12 "How to order" on page 60)
Line frequency
47…63Hz, automatic adjustment to frequencies in this range
24VDC-Supply voltage Terminals 5+7 or
PROFIBUS plug, pins 2+7
24VDC, Imax = 100mA Tolerance: +10 / -10% The 24VDC-Supply voltage can be fed either via terminals 5 and 7 or via the
PROFIBUS plug at pins 2 and 7.
PROFIBUS-DP interface
Baud rates:
9.6kbaud; 19.2kbaud; 45.45kbaud; 93.75kbaud; 187.5kbaud;
500kbaud; 1.5Mbaud; 3Mbaud; 6Mbaud; 12Mbaud Plug acc. to IEC 61158
Heatsealing band type and temperature range
All controllers manufactured as of February 2006:
The temperature range and temperature coefficient settings can also be specified
by means of the ROPEX visualization software ( section 7.11 "Diagnostic interface/visualization software (as of February 2006)" on page 47) in addition to the
rotary coding switch (see below):
Temperature range:
200°C, 300°C, 400°C or 500°C Temperature coefficient: 400…4000ppm (variable setting range)
All controllers manufactured as of start of production:
Five different ranges can be set with the rotary coding switch or via the PROFIBUS
interface:
Temperature coefficient 1100ppm, 0…300°C (e.g. Alloy A20) Temperature coefficient 780ppm, 0…300°C (e.g. Alloy L)
Temperature coefficient 1100ppm, 0…500°C (e.g. Alloy A20) Temperature coefficient 780ppm, 0…500°C (e.g. Alloy L)
Temperature coefficient 3500ppm, 0…300°C (e.g. LEX3500) The settings for a temperature coefficient of 780ppm are only available on controllers manufactured as of October 2003.
Version 1
RES-406
Page 57