Ropex UPT-6010 7601000 Temperature Controller

Device functions
The start temperature ( section 8.6.12 "Start temperature" on page 32) and the internal device temperature are
available at slot 1, subslot 3. They are read-only values which cannot be written,
Index
Function
0/1
Start temperature
2/3
Device temperature
Default value
Value range
-99 °C
-99…500 °C -60…190 °C
The channel-specific deviations from the calibration data are available at slot 1, subslot 4 ( section 8.5.5 "Master
AUTOCAL (MA)" on page 28). They are read-only values which cannot be changed. The absolute calibration
resistances are available from index 17. At index 16 the value of the passes through the current transformer is
available. This value can also be written and will be stored retentively in the controllers memory with every change.
The correct calculation of the absolute calibration resistances is only possible if the real count of wire passes
through the current transformer is given in this parameter.
!
The indices 16 to 48 are first available as from firmware version 303.
Index
Function
Default value
Value range
0/1
Calibration deviation, channel 0 (in 0.01%)
0
-100.00%…100.00%
2/3
Calibration deviation, channel 1 (in 0.01%)
0
-100.00%…100.00%
4/5
Calibration deviation, channel 2 (in 0.01%)
0
-100.00%…100.00%
6/7
Calibration deviation, channel 3 (in 0.01%)
0
-100.00%…100.00%
8/9
Calibration deviation, channel 4 (in 0.01%)
0
-100.00%…100.00%
10/11
Calibration deviation, channel 5 (in 0.01%)
0
-100.00%…100.00%
12/13
Calibration deviation, channel 6 (in 0.01%)
0
-100.00%…100.00%
14/15
Calibration deviation, channel 7 (in 0.01%)
0
-100.00%…100.00%
Passes through current transformer
1
1…9
17/18
Initial calibration resistance, channel 0 (in 0.1 m
0
0…6553.5 m
19/20
Initial calibration resistance, channel 1 (in 0.1 m
0
0…6553.5 m
21/22
Initial calibration resistance, channel 2 (in 0.1 m
0
0…6553.5 m
23/24
Initial calibration resistance, channel 3 (in 0.1 m
0
0…6553.5 m
25/26
Initial calibration resistance, channel 4 (in 0.1 m
0
0…6553.5 m
27/28
Initial calibration resistance, channel 5 (in 0.1 m
0
0…6553.5 m
29/30
Initial calibration resistance, channel 6 (in 0.1 m
0
0…6553.5 m
31/32
Initial calibration resistance, channel 7 (in 0.1 m
0
0…6553.5 m
33/34
Calibration resistance, channel 0 (in 0.1 m
0
0…6553.5 m
35/36
Calibration resistance, channel 1 (in 0.1 m
0
0…6553.5 m
37/38
Calibration resistance, channel 2 (in 0.1 m
0
0…6553.5 m
16
Version 6
UPT-6010
Page 36