قطع غيار صناعية وحلول هندسية منذ 2001.
Ropex UPT-640 Temperature Controller
أوراق البيانات الفنية / وثائق المنتج
| العلامة التجارية | |
| الفئة | وحدة تحكم |
| اسم المنتج | Ropex UPT-640 Temperature Controller |
| كود المنتج | غير محدد |
تواصل معنا! 24 ساعة عمل (باستثناء عطلات نهاية الأسبوع والعطلات الرسمية) لتأكيد حالة المخزون ووقت التسليم المتوقع.
وصف المنتج
يتم توريد منتجات Ropex، بما في ذلك Ropex UPT-640 Temperature Controller، عبر قنوات الاستيراد الموازي وتسليمها إلى عملائنا في United States بسرعة وموثوقية. تقدم Imtek Engineering قطع Ropex الأصلية بأسعار تنافسية. حتى لو لم يكن Ropex UPT-640 Temperature Controller مدرجًا في موقعنا، يمكنك طلب عرض سعر في أي وقت وسيرد فريقنا عليك في أقرب وقت ممكن.
5
Technical data
Type of construction
Housing for front panel mounting Dimensions (W x H): 144 x 72mm; depth: 161mm (incl. terminals)
Line voltage
400VAC version: 380VAC -15%…415VAC +10% (equivalent to 323…456VAC) depending on device version ( Kap. 12 „How to order“ auf Seite 53)
Line frequency
47…63Hz, automatic adjustment to frequencies in this range
Heatsealing band type and temperature range
The temperature range and temperature coefficient can be set independently of
one another in the Configuration menu:
Temperature range:
200°C, 300°C, 400°C, 500°C (as of SW revision 102) Temperature coefficient: 400…4000ppm (variable setting range)
Set point selection/ analog input Terminals 20+23
Via the Settings menu in the controller or the electrically isolated analog input:
Input resistance: 40kohms, reverse polarity-protected 0…10VDC, equivalent to 0…300°C or 0…500°C
Analog output (actual value) Terminals 20+24
0…10VDC, Imax = 5mA Equivalent to 0…300°C or 0…500°C Electrically isolated
Accuracy: ±1% add. 50mV
Digital logic levels Terminals 3, 4, 22, 25, 26
LOW (0V): 0…2VDC
HIGH (24VDC): 12…30VDC (max. current input 6mA) Electrically isolated, reverse polarity-protected
START and
RELEASE (CH1) with contact Terminals 2+7 and 2+19
Switching threshold: 3.5VDC, Umax = 5VDC, Imax = 5mA
Switching output for „"Output 1"/ Temp. OK" signal Terminals 20+21
Umax = 30VDC, Imax = 50mA
UON < 2V (saturation voltage) Transistor conductive if the temperature is inside the tolerance band.
Alarm relay Terminals 5+6
Contact, potential-free, Umax = 30V (DC/AC), Imax = 0.2A
Relay K1 Terminals 16, 17, 18
Changeover contact, potential-free, Umax = 240VAC/100VDC, Imax = 1.5A Interference suppression with 47nF / 560ohms for each terminal
Maximum load (primary current of impulse transformer)
Imax = 5A (duty cycle = 100%) Imax = 25A (duty cycle = 20%)
Power dissipation
max. 25W
Display
LC display (green), 4 lines, 20 characters, alternatively:
VF display (blue), 4 lines, 20 characters
Ambient temperature
+5…+45°C
UPT-640 (as of SW 100)
9
الأسئلة الشائعة
أسئلة شائعة حول Ropex UPT-640 Temperature Controller من Ropex. شركة Imtek Engineering مستعدة لمساعدتك في الحصول على Ropex UPT-640 Temperature Controller من Ropex في United States.
تحصل Imtek Engineering على منتجات Ropex الأصلية من خلال قنوات توريد موثوقة وتقدّمها للعملاء في United States بأسعار تنافسية.

