Santerno Sinus Penta Inverter

High-performance motor drive applicable to:
– Three-phase asynchronous motors
– Three-phase synchronous motors
– Sinusoidal current regenerative AFE from 1.3kW a 3000kW

The drives of the Sinus PENTA series come with multiple speed control modes and torque control modes for three-phase asynchronous and synchronous motors. Those control modes are user-selectable and ensure optimum performance in terms of accuracy and energy saving for each specific industrial application.

Model configuration

The following configuration options may be integrated into the product:

– Breaking unit: configuration with braking unit integrated up to size S32 included. An external braking unit is available for sizes greater than S32.
– EMC Filter: Product version featuring integrated input filters in compliance with EN61800-3 2nd ed. In that case, the product ID is differentiated by suffix A1, A2, B. The integrated filters limit disturbance within the allowable ranges.
– Degree of protection IP54: Models with degree of protection IP54 available up to size S32 included (220kW).
– Operating devices: Set of operating devices on the front door, including a potentiometer, a mushroom-head push-button and a key-operated selector switch. Available for IP54 models only.

Special configuration

– Sinus Penta Parallel, configuration in parallel of 2 or 3 drives to control a single motor; available for size S41, S42, S51, S52. Benefits given by this solution: lower cost; improved stock management—the product may be modified for the connection in parallel by way of a special kit available on demand; easier repairings/replacement; space-saving.
– 12-pulse or 18-pulse power supply: from size S41 up, power supply may be 12-pulse/18-pulse to reduce the current harmonic contents in the power supply line.
– The PENTA MARINE drive in Regenerative configuration enables bidirectional interface with the mains, with power factor = 1 (true AFE application). Its true sine wave also enables dramatically reducing the THD below 5% and obtaining THDV = 0.
– Extensive range of external accessories: input and output filters, encoder, resolver, braking resistors, etc.

A high-tech solution fitting any industrial application

– Fully made of steel
– Wide range of operating temperature with no derating: -10°C to 55°C
– Tropicalized boards (conformal coating)
– Overload up to 200% for 2 minutes every 20 minutes or 1 minute every 10 minutes (depending on the drive model)
– Peak current up to 240% for 3 seconds
– Input frequency: 50-60Hz
– Integrated RS485 serial port, MODBUS RTU communications protocol
– Wide range of integrated protection features
– Output frequency adjustment from 0 to 599Hz (up to 1000Hz on demand)
– Degree of protection IP00, IP20, IP54
– Parallel configuration also available
– Smart cooling system – Through-panel assembly for the segregation of the servoventilation channels
– SINUS PENTA CABINET/BOX in electrical cabinet also available
– Compatible with TN-S, TN-C, TN-CS and TT networks Compatibility with IT networks available on demand
– Manufactured with top quality materials, totally Made in Italy
– Integrated Safe Torque Off (STO) function, Sil3 and EN ISO 13849-1, PL-d
– Certification: CE, UL, EAC, RCM
– Compatible with the Easy Harmonics software computing harmonic current damping
– Compatible with the “REMOTE DRIVE” software for the remote control of the device

Advanced performance

– Fully made of steel
– Wide range of operating temperature with no derating: -10°C to 55°C
– Tropicalized boards (conformal coating)
– Overload up to 200% for 2 minutes every 20 minutes or 1 minute every 10 minutes (depending on the drive model)
– Peak current up to 240% for 3 seconds
– Input frequency: 50-60Hz
– Integrated RS485 serial port, MODBUS RTU communications protocol
– Wide range of integrated protection features
– Output frequency adjustment from 0 to 599Hz (up to 1000Hz on demand)
– Degree of protection IP00, IP20, IP54
– Parallel configuration also available
– Smart cooling system – Through-panel assembly for the segregation of the servoventilation channels
– SINUS PENTA CABINET/BOX in electrical cabinet also available
– Compatible with TN-S, TN-C, TN-CS and TT networks Compatibility with IT networks available on demand
– Manufactured with top quality materials, totally Made in Italy
– Integrated Safe Torque Off (STO) function, Sil3 and EN ISO 13849-1, PL-d
– Certification: CE, UL, EAC, RCM
– Compatible with the Easy Harmonics software computing harmonic current damping
– Compatible with the “REMOTE DRIVE” software for the remote control of the device

Advanced performance

– Fully made of steel
– Wide range of operating temperature with no derating: -10°C to 55°C
– Tropicalized boards (conformal coating)
– Overload up to 200% for 2 minutes every 20 minutes or 1 minute every 10 minutes (depending on the drive model)
– Peak current up to 240% for 3 seconds
– Input frequency: 50-60Hz
– Integrated RS485 serial port, MODBUS RTU communications protocol
– Wide range of integrated protection features
– Output frequency adjustment from 0 to 599Hz (up to 1000Hz on demand)
– Degree of protection IP00, IP20, IP54
– Parallel configuration also available
– Smart cooling system – Through-panel assembly for the segregation of the servoventilation channels
– SINUS PENTA CABINET/BOX in electrical cabinet also available
– Compatible with TN-S, TN-C, TN-CS and TT networks Compatibility with IT networks available on demand
– Manufactured with top quality materials, totally Made in Italy
– Integrated Safe Torque Off (STO) function, Sil3 and EN ISO 13849-1, PL-d
– Certification: CE, UL, EAC, RCM
– Compatible with the Easy Harmonics software computing harmonic current damping
– Compatible with the “REMOTE DRIVE” software for the remote control of the device

Advanced performance

– Fully made of steel
– Wide range of operating temperature with no derating: -10°C to 55°C
– Tropicalized boards (conformal coating)
– Overload up to 200% for 2 minutes every 20 minutes or 1 minute every 10 minutes (depending on the drive model)
– Peak current up to 240% for 3 seconds
– Input frequency: 50-60Hz
– Integrated RS485 serial port, MODBUS RTU communications protocol
– Wide range of integrated protection features
– Output frequency adjustment from 0 to 599Hz (up to 1000Hz on demand)
– Degree of protection IP00, IP20, IP54
– Parallel configuration also available
– Smart cooling system – Through-panel assembly for the segregation of the servoventilation channels
– SINUS PENTA CABINET/BOX in electrical cabinet also available
– Compatible with TN-S, TN-C, TN-CS and TT networks Compatibility with IT networks available on demand
– Manufactured with top quality materials, totally Made in Italy
– Integrated Safe Torque Off (STO) function, Sil3 and EN ISO 13849-1, PL-d
– Certification: CE, UL, EAC, RCM
– Compatible with the Easy Harmonics software computing harmonic current damping
– Compatible with the “REMOTE DRIVE” software for the remote control of the device

Advanced performance

– Fully made of steel
– Wide range of operating temperature with no derating: -10°C to 55°C
– Tropicalized boards (conformal coating)
– Overload up to 200% for 2 minutes every 20 minutes or 1 minute every 10 minutes (depending on the drive model)
– Peak current up to 240% for 3 seconds
– Input frequency: 50-60Hz
– Integrated RS485 serial port, MODBUS RTU communications protocol
– Wide range of integrated protection features
– Output frequency adjustment from 0 to 599Hz (up to 1000Hz on demand)
– Degree of protection IP00, IP20, IP54
– Parallel configuration also available
– Smart cooling system – Through-panel assembly for the segregation of the servoventilation channels
– SINUS PENTA CABINET/BOX in electrical cabinet also available
– Compatible with TN-S, TN-C, TN-CS and TT networks Compatibility with IT networks available on demand
– Manufactured with top quality materials, totally Made in Italy
– Integrated Safe Torque Off (STO) function, Sil3 and EN ISO 13849-1, PL-d
– Certification: CE, UL, EAC, RCM
– Compatible with the Easy Harmonics software computing harmonic current damping
– Compatible with the “REMOTE DRIVE” software for the remote control of the device

Advanced performance

– Fully made of steel
– Wide range of operating temperature with no derating: -10°C to 55°C
– Tropicalized boards (conformal coating)
– Overload up to 200% for 2 minutes every 20 minutes or 1 minute every 10 minutes (depending on the drive model)
– Peak current up to 240% for 3 seconds
– Input frequency: 50-60Hz
– Integrated RS485 serial port, MODBUS RTU communications protocol
– Wide range of integrated protection features
– Output frequency adjustment from 0 to 599Hz (up to 1000Hz on demand)
– Degree of protection IP00, IP20, IP54
– Parallel configuration also available
– Smart cooling system – Through-panel assembly for the segregation of the servoventilation channels
– SINUS PENTA CABINET/BOX in electrical cabinet also available
– Compatible with TN-S, TN-C, TN-CS and TT networks Compatibility with IT networks available on demand
– Manufactured with top quality materials, totally Made in Italy
– Integrated Safe Torque Off (STO) function, Sil3 and EN ISO 13849-1, PL-d
– Certification: CE, UL, EAC, RCM
– Compatible with the Easy Harmonics software computing harmonic current damping
– Compatible with the “REMOTE DRIVE” software for the remote control of the device

Advanced performance

– Fully made of steel
– Wide range of operating temperature with no derating: -10°C to 55°C
– Tropicalized boards (conformal coating)
– Overload up to 200% for 2 minutes every 20 minutes or 1 minute every 10 minutes (depending on the drive model)
– Peak current up to 240% for 3 seconds
– Input frequency: 50-60Hz
– Integrated RS485 serial port, MODBUS RTU communications protocol
– Wide range of integrated protection features
– Output frequency adjustment from 0 to 599Hz (up to 1000Hz on demand)
– Degree of protection IP00, IP20, IP54
– Parallel configuration also available
– Smart cooling system – Through-panel assembly for the segregation of the servoventilation channels
– SINUS PENTA CABINET/BOX in electrical cabinet also available
– Compatible with TN-S, TN-C, TN-CS and TT networks Compatibility with IT networks available on demand
– Manufactured with top quality materials, totally Made in Italy
– Integrated Safe Torque Off (STO) function, Sil3 and EN ISO 13849-1, PL-d
– Certification: CE, UL, EAC, RCM
– Compatible with the Easy Harmonics software computing harmonic current damping
– Compatible with the “REMOTE DRIVE” software for the remote control of the device

لا يوجد وصف عام متاح في الوقت الحالي