Senseca GTH1150 Thermometer

H56.0.02.6C-01
Operating Manual GTH 1150 _____________________________________________________
Page 10 von 10 _____________________________________________________________________________
9 Specification Resolution Measuring range Accuracy (at nominal temperature)
Sensor
Nominal temperature Working temperature
Atmospheric humidity Storage temperature Display Power supply Battery service life
Low battery warning Dimensions of case Weight Directives and standards
1 °C -50 … 1150 °C ±0.2 % v.MW. ±0.2 % FS.
For more detailed values please refer to chapter 5 Basics of the measurement
Type K (NiCr-Ni), acc. to ½ DIN 43710, for plug-in operation.
(Not included in scope off supply). Special design sensors incl. one of the following probes see chapter 6 Type K-sensor
25 °C 0 to +45 °C, please avoid quick temperature changes, if possible, otherwise a temperature adjustment time of approx.
15 minutes has to be taken into account 0 … 80 % RH (not-condensing) -25 … +70 °C (Over 50 °C please remove battery)
approx. 13 mm high, 3½-digit LCD 9V-Battery, type IEC 6F22 > 1000 hours „BAT“displayed automatically in case of low battery.
106 x 67 x 30 mm (L x B x D) approx. 130 g (including battery) The instruments confirm to following European directives:
2014/30/EU
EMV directives 2011/65/EU RoHS 2012/19/EU WEEE Applied harmonized standards:
EN 61326-1:2013 emissions level: class B emi immunity according to table
1 /A.1 additional error: < 0.5 % FS
EN 50581:2012 The device is for the mobile application or for the stationary
operation in the course of specified working conditions without further restrictions construed.