Stahl 8573/13-200 Socket

SolConeX extra-low voltage wall-mounting socket Series 8573/13 Technical Data
Electrical data Rated operational voltage Frequency Voltage tolerance Utilization category
Rated insulation voltage Back-up fuse without thermal protection with thermal protection
Ambient conditions Ambient temperature
E3 max. 50 V 0 to 60 Hz (for frequencies > 100 Hz reduction to 12 A required)
-10 ... +6 % AC-3: 50 V / 16 A DC-1: 50 V / 16 A DC-13: 50 V / 16 A 550 V
Weight Service life Tightening torque Cable entries Cable gland
Stopping plug
Cable diameter Plug cable diameter
E3
16 A gG 35 A gG
E3
-50 to +60 °C -40 to +60 °C, optional (silicone-free) Temperature class
Current
Ambient temperature
T6
16 A [2.5 mm2]
Ta = 40 °C
12 A [2.5 mm2]
Ta = 55 °C
mm2]
Ta = 60 °C
10 A [2.5 Mechanical data Number of poles Enclosure material Degree of protection
Connection type Connection cross-section
E3
E3
2P/3P Polyamide, glass fibre reinforced IP66 acc. to IEC/EN 60529 Screw terminals
E3
solid
1 x 0.75 mm2 ... 2 x 4 mm2
finely stranded
1 x 0.75 mm2 ... 2 x 4 mm2
finely stranded with core end sleeve
1 x 0.75 mm2 ... 2 x 4 mm2
E3
0.300 kg > 5,000 switching cycles (electrical and mechanical) acc. to IEC/EN 60309-1
Terminals: 1.2 Nm Connection chamber cover of the wall-mounting socket: max. 1.8 Nm
E3
1 x M25x1.5 on bottom (acc. to order, positioning on the top or at the side also possible)
Optional: on the top max. 2 x M25x1.5; also available with stopping plug or metallic entries
Thread size
A/F
Clamping range
Clamping range + RDE*
Tightening torque Connection thread at 20 °C
Tightening torque Cap nut at 20 °C
M20x1.5
24
7 to 13 mm
4 to 8 mm
2.3 Nm
1.5 Nm
M25x1.5 29 10 to 17 mm 7 to 12 mm 3 Nm 2 Nm
* Reduction sealing insert
1) max. clamping range depending on expansion adapter used (smaller if applicable)
1 x M25x1.5 When used in an application range of < -40 °C, the seal is only intended for a one-time installation.
Replace the seal before mounting it again.
Thread size
A/F
Tightening torque Connection thread at 20 °C
M20x1.5
24
1 Nm
M25x1.5
29
1.5 Nm
M32x1.5
36
2.5 Nm
E3 E3 E3 E3
8 - 20 8 to 18 mm Ring 1 + 2 + 3 + 4
8 to 11 mm
Ring 2 + 3 + 4
11 to 15 mm
Ring 3 + 4
15 to 18 mm
E3 E3
2016-11-15·EK00·III·en
Installation Equipment
E3/3