Ascon XP-3100/99 Controller

12 • TECHNICAL DATA Three states: Increase - stop - Decrease Main output Y1
Interlocked contacts "NO" 5A/250 Vac, 2x105 operations Direct or inverse action selectable
Relay
2 contacts NO, 5A/250Vac, 2x105 transitions
Action mode
active high (above the set point) active low (below the set point)
Hysteresis
0,1..10%
Auxiliary outputs Y2 - Y3 Type of Set point (configurable)
deviation
± 300 steps (with or without inhibited startup)
band
0...300 steps
independent
from beginning to end of scale
Loop-Break-Alarm (signal of control loop defect) Special functions Retransmission Current
output Y4 (option) Voltage
time-programmable (only for Set programmable option) 4..20mA (450Ω max, 10Vdc max)
0..10Vdc (500Ω min, 20mA max)
galvanically isolated
Serial Interface 20mA C.L. passive and galvanically isolated communication
For other data, see manual (option) On three levels for: modification, indication only,
no access Immunity to disturbances level IV, standard IEC 801-4 Access to parameters
Protections
All significant data are stored in a non-volatile memory
Single power supply
Standard model
100..240V, 48..63Hz, -15% + 10% 250Vac max
Low voltage model
24V, 48..63Hz, -15% + 10% or 24Vdc ± 15%
Absorbed power
about 4VA
Auxiliary 24Vdc ± 10%, 20mA max. for 2-wire or 3 or 4-wire transmitter power supply
General features
Isolation group
C according to VDE 0110
Climatic group
KWF according to DIN 40040
Ambient
temperature 0...50°C., humidity 35...85uR%
Protection
Front:IP54 standard (IP65 with Kit AXIP65- 1) Cover: IP30, terminal board IP20
Material
Self-extinguishing 94V1
Weight
about 480 g.
Dimensions
48 x 96, depth 150mm, according to DIN 43700
17