Product Name: Ayvaz KKS-10 Condensate Pollution Control System
Brand: Ayvaz
Product Code: KKS-10
Tags: Ayvaz
Ayvaz Control
Control
KKS-10 Condensate
Ayvaz KKS-10 Condensate System
Ayvaz Condensate Pollution System
Ayvaz Condensate Pollution Control System
Ayvaz Condensate Pollution
Ayvaz KKS-10 Control
Ayvaz Condensate Control System
Ayvaz Condensate
Control System
Condensate Pollution
Pollution Control System
Ayvaz Condensate
Ayvaz KKS-10 Control System
Ayvaz KKS-10 Condensate Control
KKS-10 Condensate Pollution Control
Ayvaz Condensate Pollution System
Condensate Pollution Control System
Are you interested in the product Ayvaz KKS-10 Condensate Pollution Control System from manufacturer Ayvaz with code KKS-10? Contact us now and get offer. Imtek Engineering, the fastest and most reliable industrial equipment supplier in the world, will offer you the best offer!
Get Offer With E-Mail: info@im-tek.com
Get a offer for Ayvaz KKS-10 Condensate Pollution Control System from our live support team now!
In order for a steam installation to work efficiently, the condensate which is going to the boiler feed tank must be inmaximum quantity and clean.Any drilling of the heating coil or plate in the steam lines causes the heated fluid to mix into the condensate water. Polluted condensate will cause accumulation of sediments on the heating surfaces, corrosion and, more importantly, contamination of the boiler feedwater will lead to a reduction in boiler life, as well as a decrease in capacity efficiency. For this reason, the pollution we may occur in the condensate that must be detected immediately.Working Principle:This system, which is located at the entrance of the condensate tank, continuously measures the electrical conductivity of the condensate water. The conductivity measurement probe value is transmitted at the system control value. The controller compares the set conductivity value with the set value. When the set value is exceeded, the discharge valve opens and the condensate is discharged.When the electric conductivity value is lower than the set value, the discharge valve closes and the condensate tank line is opened. It is sent to the condensate tank.Since the electrical conductivity varies with temperature, the conductivity probe used in the system must be able to measure the conductivity at the temperature together with the conductivity so that the conductivity of the condensate at every temperature can be measured accurately.