B&R Automation X20DO4529 Module

Technical description
2 Technical description 2.1 Technical data Order number Short description
I/O module General information B&R ID code Status indicators Diagnostics
Module run/error Outputs Power consumption Bus Internal I/O Additional power dissipation caused by actuators (resistive) [W] 1)
Certifications CE UKCA ATEX
UL HazLoc
DNV
CCS LR KR ABS BV
KC Digital outputs Variant Nominal voltage Max. voltage Switching voltage
Rated frequency Nominal output current Total nominal current Actuator power supply
Inrush current Contact resistance Switching delay 0→1 1→0 Insulation voltages
Channel - Bus Channel - Channel Service life Electrical 2) Mechanical Switching capacity
Minimum Maximum
X20DO4529 4 digital outputs 30 VDC / 115 VAC, outputs single-channel isolated
0x20D9 I/O function per channel, operating state, module status Yes, using LED status indicator and software
Yes, using LED status indicator 0.8 W +0.3
Yes Yes Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X cULus E115267 Industrial control equipment cCSAus 244665
Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5
Temperature: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g)
EMC: B (bridge and open deck) Yes ENV1 Yes Yes EC33B Temperature: 5 - 55°C
Vibration: 4 g
EMC: Bridge and open deck Yes Relay / Changeover contact Channels are single-channel isolated.
30 VDC / 115 VAC 125 VAC Max. 110 VDC / 125 VAC
DC / 45 to 63 Hz 1 A at 30 VDC / 0.5 A at 115 VAC 4 A at 30 VDC / 2 A at 115 VAC
External Max. 2 A (per channel) 75 mΩ at 6 VDC / 1 A ≤4 ms ≤4 ms Tested at 1500 VAC
Tested at 1000 VAC Min. 100 x 10³ ops.
Min. 50 x 106 ops. (3 Hz) 0.01 mA / 10 mV DC 30 W / 62.5 VA
Table 2: X20DO4529 - Technical data
4
X20DO4529 Data sheet V 3.20