Bartec 07-1511-1530/04

03-0330-0154/B-05/2021-ESS-129306
Insert switch/limit switch
Insert switch with connection cores
Limit switch with connection cable
This switching element can be universally used for switching, controlling and regulating operations within Ex-areas. The
insert switch is audited to the latest ATEX-Directive 2014/34/ EU. Devices equipped with these insert switches have to be
approved by a testing authority, the switch itself needs not be retested. The cable cores are cast-in at the back of the switch.
Their standard length is 500 mm; other lengths are available on request. To connect the cores we recommend the miniterminals
from BARTEC.
The limit switches have been developed for Ex-areas where safe and reliable signalling is required, for example on
pumps, petrol pumps, as well as in mechanical and high-tech engineering. The switches must be mounted into the respective
devices or systems in such a way as to guarantee mechanical protection. No further tests are required. The connection
cable is cast-in on the back of the switch. For the connection in Ex-areas BARTEC provides a large variety of terminals and
terminal boxes.
Explosion protection
Technical data
Limit switch
Ex d insert switch/limit switch DIN EN 60947-5-1/DIN EN 60947-1
ATEX
Ex II 2G Ex db IIC T6, T5 Gb Ex II 2D Ex tb IIIC T80°C, T95°C Db
Certification
EPS 14 ATEX 1 766 X
IECEx
Ex db IIC T6, T5 Gb Ex tb IIIC T80 °C, T95 °C Db
Certification
IECEx EPS 14.0092 X
Other approvals and certificates, bartec.com
Insert switch ATEX
Ex II 2G Ex db IIC Gb Ex I M2 Ex db I Mb
Certification
EPS 14 ATEX 1 765 U
IECEx
Ex db IIC Gb Ex db I Mb
Certification
IECEx EPS 14.0091 U
Other approvals and certificates, bartec.com
Ambient temperature
-60 °C to +100 °C depending on the type and materials used
Ambient temperature limit switches
T6 to max. +75 °C depending on the rated current
Protection class
IP 66 (IEC/EN 60529)
BARTEC GmbH Max-Eyth-Str. 16 97980 Bad Mergentheim
Tel.: +49 7931 597 0 Fax: +49 7931 597 119
Electrical data for control switch in accordance with
DIN EN 60947-5-1
Rated operating voltage Utilization category AC-15 4A AC-15 2A DC-13 0.15 A
Isolation voltage
AC 400 V
Ambient temperature
+40 °C
AC switching capacity

ohmic load inductive load cos φ = 0.6 400 V 3A 2A 250 V 5A 3A 30 V 7A 5A
DC switching capacity

ohmic load inductive load
L/R = 3 μs 250 V 0.4 A 0.03 A 30 V 7A 5A
Tightening torque of fixing screws
0.6 Nm
Rating of gold-coated contacts
Min. DC 2,4V - 50 mA Max. DC 30V - 4 mA the product of voltage and current should
not exceed 0.12 VA for alternating current these values have to be interpreted as peak values
250 V 400 V 250 V 400 V
Mail: [email protected] Web: bartec.com 1