Crude oil distillation system for semi-automatic operation exactly according to ASTM D-2892 (TBP).
The system is designed for automatic operation within each of the following distillation runs:
Debutanization
1. run at athmospheric pressure
2. run at vacuum 100 Torr
3. run at vacuum 10 Torr
4. run at vacuum 2 Torr
After each run, the system stops automatically and the flask temperature has to be cooled down prior to the next distillation run. The operator has to enter the parameters for the next run to restart operation. The system contains a vacuum tight automatic fraction collector with 9 receivers for each run, which have to be replaced after each distillation run. The receiver change is performed according to pre-selected boiling temperature or when a receiver is filled up.
Key Features
Microprocessor controlled, based on multifunctional serial bus system
PC with windows based operation and evaluation software
Continuous monitoring of distillation process
Continuous report and data storage
Flask heater control by differential temperature, differential pressure, power regulation or preselected fixed temperature
All distillation parameters can be exactly and reproducibly selected
Automatic receiver change by preselected cut temperatures
Debutanization process manually
Cooling down process manually after each run
Precise vacuum control
Options
Stainless steel flask
Immersion cooler for vacuum cold traps and gas trap
