im-tek.com

Celem MT SERIES Matching Transformers

Celem

Product Code: MT SERIES
Brand: Celem



GET OFFER: info@imtek.com.tr

Description for Celem MT SERIES Matching Transformers

The MT series creatively addresses the key characteristics of high quality matching transformers for high frequency / high power applications. The skin effect in the MT is negligible due to its unique laminar structure. Instead of the traditional copper tubes, the MT winding is made of laminar copper sheets. At 350 kHz this revolutionary structure reduces resistive losses by a factor of 10, and consequently increases overall efficiency to above 90%. The coupling coefficient of the MT is exceptionally high. Using alternating primary and secondary layers of thin copper sheets creates unprecedented coupling and very low reactive losses. The MT was designed to achieve zero stray inductance. This advanced design results in short circuit voltage of less than 10%, so that over 90% of the available reactive power is transmitted to the load. The MT completely avoids de-rating of specification when tapped, through an innovative yet simple combination of identical coil elements that are connected in series and parallel. This enables the transformation ratio to be modified quickly and without power reduction. The frequency range of the MT is exceptionally wide: 5 – 350 kHz. This is made possible by practically eliminating stray inductance, as well as by using high saturation ferrite.Specifications TYPE MT 250 MT 300 MT 500 MT 1000 Dimensions (L x W x H) mm 287.5 x 228 x125 287.5 x 228 x170 287.5 x 228 x170 287.5 x 228 x 260 Weight kg 18 22 26 45 Tapping ratio 3:1 4:1 2:1 6:1 3:1 2:1 12:1 6:1 4:1 3:1 2:1 Max Primary voltage Vrms 600 800 1200 1200 Max secondary current A 1500 2000 3000 6000 Max primary current A 500 500 1000 500 1000 1500 500 1000 1500 2000 3000 Reactive power transfer % > 90% > 90% > 90% > 90% Active efficiency % > 95% > 95% > 95% > 95% Max power kVA 250 300 500 1000 Stray inductance ?H < 0.2 < 0.3 < 0.4 < 1.5 Frequency range kHz 20 - 350 20 - 350 20 - 350

Recommended Products For Celem


Celem CSM IPT Conduction Cooled Capacitor
Celem CSP 505 Water-Cooled Capacitor
Celem CSM 300N Conduction Cooled Capacitor
Celem C500TW Water-Cooled Capacitor
Celem C700T Conduction Cooled Capacitor
Celem CSP 405B Conduction Cooled Capacitor
Celem MT SERIES Matching Transformers
Celem CSP 305B Conduction Cooled Capacitor
Celem CSM 150/300 Conduction Cooled Capacitor
Celem CSP 150/400 Conduction Cooled Capacitor
Celem CSP 1200 Water-Cooled Capacitor
Celem QUAD 1000 Water-Cooled Capacitor
Celem QUAD 1001 HV Water-Cooled Capacitor
Celem CLF3 Water-Cooled Capacitor
Celem CSM 150 Conduction Cooled Capacitor
Celem CPRI 300 Ultra-High Frequency
Celem C - CAP 02 Capacitor
Celem C - CAP 03 Capacitor
Air Dimensions M121- Metric M-Series Dia-Vac® Pump Double Head Hazardous Area
MBS MLW 88 4 22 1 1500 Sanitary Mixflo Multitube
Armatury S33.2 Gate Valve
JVM JX 184-300 Unbalance Motor
Eltra EL63D1024S5L10X3PR Encoder
Faulhaber AM2224R3012585 Stepper Motor
Asco L12BA452 BG00061 Valve
Zeppelin VST 100 Diverter Valve
Eaton DU63-0000 Duplex Filter
Friedrich F 95-6-1.2 Vibrator Motor F-Type
Knf NMP0151.2XPDC-S Micro Diaphragm Gas Pump
FIP Italy DKUAC Series DN 15÷65 DIALOCK® 2-way Diaphragm Valve
CD Automation REVO C 3PH Revo Connect – Three-Phase Power Controller
American Industrial URCN-1784 Heat Exchanger
Vulcanic 2323-35 Screw Plug Immersion Heater
Ifm IM5044 Inductive sensor
Aignep 50055N FEMALE BULKHEAD CONNECTOR
Habasit HNZ-08P Belt
Scherzinger 4030-280-B-DM-25-4-Exd Stainless Steel Gear Pumps 4030
Ru-Steel AFIC 5 Elastics
Gefran LS-A-W-0-Z-0650-0-000X-0-0-0X Linear Position Transducer
Mahle Pi 47010-015 70304308 Duplex Filter
Eurotherm 2500M/DI8LOGIC//XXXXX/XXXXXX Module Eurotherm 2500M/DI8LOGIC//XXXXX/XXXXXX Module
Wilkerson L28-C4-KK00 Plastic Lubricator