Cemb AL10 Laser Belt Alignment
Cemb
Product Code: AL10
Brand: Cemb
GET OFFER: info@imtek.com.tr
Description for Cemb AL10 Laser Belt Alignment
The new Laser Belt Alignment System AL10 uses two laser transmitters for the projection of atwo laser lines. The pulley groves are used as a reference. These generated linesindicate the alignment of the transmission quickly and correctly.Aligment processThe two laser units generate a line on the opposite unit. When the pulleys are correctly aligned, the lines coincide with the references centering on both units. The dual laser alignment provides greater precision and speed than single laser systems. If the belt transmission is misaligned, the line deviates from the center.TYPES OF MISALIGNMENTIt is very important that the pulleys are mounted correctly on the shafts and that the shafts are straight before starting the alignment process. The oscillating or deformed sheaves severely influence the quality of the alignment. The types of misalignment are described below:Angular misalignmentParallel misalignmentHousing materialAluminumDimensions head units61 x 77 x 61 mmWeight300 g/unitBattery type2x LR03 (AAA) 1,5V per unitOperating time20 hrs continuous operationMeasuring distance50 mm – 6000 mmMeasuring accuracybetter than 0.5 mm or 0.2 degreesPulley diameter rangefrom 75 mm and larger (standard)Pulley belt groove width6 mm - 40 mm (standard)Laser class 2output power: <1 mWLaser wavelength600 - 650 nmRecommended Products For Cemb
Cemb VUBK50-UF-A- 3 axis For Clutches With Unbalance Correction by Drilling and/or by Contour Milling
Goldammer NTR 70-SR30-T1-A-FE-L370-01-L1/250/S-T50Ö-III-M12 Level - Temperature - Capillary tube – Regulator
Eurotherm 2500T/AO2/UNIV/NONE//XXXXX/XXXXXX/ 2 Ch Analogue Output Card Terminal Eurotherm 2500T/AO2/UNIV/NONE//XXXXX/XXXXXX/ 2 Ch Analogue Output Card Terminal
Topworx 74-13567C2 - 5/8Inch, SPDT, End Sensing, CSA GP, 36Inch Water Resistant, 316 Stainless Steel, Model 74 GO Switch