Industrial spare parts & engineering solutions since 2001.
Cemb TA-18/S/X/0 Vibration Sensor
Technical Datasheets / Product Documentations
| Brand |  |
| Category | Sensor |
| Product Name | Cemb TA-18/S/X/0 Vibration Sensor |
| Product Code | TA-18/S/X/0 |
Contact with us! 24 business hours (excluding weekends and holidays) to confirm stock status and estimated delivery time.
Product Description
Cemb products, including Cemb TA-18/S/X/0 Vibration Sensor, are sourced through parallel import channels and delivered to our customers worldwide with speed and reliability. As an authorized trading partner, Imtek Engineering offers genuine Cemb parts at competitive prices. Even if Cemb TA-18/S/X/0 Vibration Sensor is not listed on our website, you are welcome to request a price quote — our team will respond promptly with a tailored offer.
ACCELEROMETER TRANSDUCER
TA-18/S
The TA-18/S transducers seismically measure absolute machine vibrations by directly fastening the vibrating part on the supports.
They provide an output signal directly proportional to the vibration of the
point on which they are fastened. This signal can subsequently be processed by a measuring channel of a CEMB “T” or “N” series device.
The TA-18/S transducers exploit the piezoelectric effect, i.e. the capability
of a material to provide a difference of potential when mechanically stressed.
In this application, a ceramic material subjected to acceleration generates
an electrical signal proportional to the stress ABSOLUTE VIBRATIONS
TECHNICAL CHARACTERISTICS GENERAL Type of measurement
seismic (absolute vibration) piezoelectric
Sensitivity
100 mV/g
Response in frequency
± 3 dB 0,5 ÷ 15000 Hz ± 10 % 2 ÷ 10000 Hz
Vibration direction
any
Dynamic range
± 50 g pk
Transverse sensitivity
<5%
ELECTRICAL Power supply
2÷10 mA - 18÷30 Vdc
Output polarization voltage
10-14 Vdc
Output impedance
< 100 ohm
Outer casing insulation
> 108 ohm
Settling time
< 2,5 sec.
AMBIENT Protection against shocks
5000 g pk
Protection against external agents
IP68
PHYSICAL Weight
90 grammi
Resonance frequency
23 kHz
Outer casing material
AISI 316-L stainless steel
Retaining screw threading
see “dimensions and threads”
Connection
MIL-C-5015 2-pin connector provided
Tightening torque
2.7 to 6.8 Nm
B A L A N C I N G
M A C H I N E S
Frequently Asked Questions
Frequently asked questions about Cemb TA-18/S/X/0 Vibration Sensor by Cemb. Imtek Engineering is ready to assist you in sourcing Cemb TA-18/S/X/0 Vibration Sensor from Cemb in United States.
United StatesImtek Engineering sources genuine Cemb products through trusted supply channels and supplies them to customers in United States at competitive prices.
