CMT VIB-CT-50057 Vibration Monitor Compact Licence

The Vibration Monitor is powerful online monitoring and diagnostics systemIt was designed to increase the reliability of strategic rotating machinery. The Vibration Monitor system can operate as an independent monitoring system or it can be used as extension of an existing protection system. The Vibration Monitor system can be also used as the multipurpose 16-channel analyzer. Each Vibration Monitor module contains 16 AC, 16 DC and 4 TACHO inputs. All channels are measured simultaneously. The measurement parameters and data processing are the same as with top-class Vibration Analyser  instrument. Single Vibration Monitor modules can be easily composed together and by this we can create widely-channels system.The A3750 software is designed for control of collection and archiving of data. By setting program it is possible to easily configure required measurements. Software A3760 enables on-line displaying of the current values on the predefined schemes. The DDS 2011 software system is designed for the following processing and archiving of the all collected data. Technical SpecificationDynamic Channels Number of synchronous parallel channels (AC)16 AC (unlimited number of slave units)Frequency range25600 Hz (65.5 kHz sampling frequency)Input range+/- 12V (only one range, no gains)Measurement timing:fully synchronousA/D Resolution:24 bit input, 64 bit double floating pointDynamic range:120 dBChannel configuration:voltage or ICP (individually for every channel)Input protection:30 VInput impedance:100 kOhmInput type:acceleration, velocity, displacement, and any non-vibration AC voltageAccuracy:< 0.5 %High pass filter:1Hz -12800 Hz (user definition)Low pass filter:25Hz -25600 Hz (user definition)RPM Channels Number:4 independent rpm inputsSpeed range:0,8 Hz - 1000 HzInput impedance:80 kOhmInput type:voltageInput range:+ 10V (only one range, no gains)Accuracy:<0.5 %Triggering:positive or negativeTrigger level:0.1 -9.9 V, user definedInput protection:48 VStatic Channels (DC) Number:16 DCInput range:+/- 24 V or 4-20mAInput impedance:100kOhm (VDC), 250 Ohm (mADC)A/D Resolution:12 bit inputAccuracy:0.1% fsdInput protection30 VMeasurement Functions Triggering:free run / impulse / external (voltage)Data acquisition:overall values / time signal / real-time FFT / envelope demodulationTime waveform samples:256 - 65536Spectrum ranges:25 - 25600Spectrum lines:100 - 25600Order analysis parameters:1/2 - 10th orderAveraging:1-255General Processor:Intel Core2 - 2.5 GHzRAM:2 GBInternal data disk:250 GB)Interface:Ethernet 1GB RJ45Power supply:AC 110-240V, 45-65HzOperating temperature:-10 °C - +50 °C, 15°F-120°FEMC:CE testedDimensions:482 x 87 x 326 mmWeight:9 kg