Industrial spare parts & engineering solutions since 2001.
德国仓直发，全球快速配送
多种支付方式多种付款选项
Dropsa 1A-0299042C Pump Element
产品描述
Dropsa的产品（包括Dropsa 1A-0299042C Pump Element）通过平行进口渠道采购，并快速可靠地交付给United States的客户。Imtek Engineering以具有竞争力的价格提供正品Dropsa零部件。即使Dropsa 1A-0299042C Pump Element未在我们的网站上列出，您也可以随时申请报价——我们的团队将迅速响应并为您提供专属报价。
United States1. INTRODUCTION This user’s and maintenance manual refers to a 989 pump series for grease.
It is recommended that this manual is carefully kept in good condition and is always available to persons requiring to
consult it.
To request further copies, updates or clarifications with respect to this manual contact the Engineering Department at
Dropsa SpA.
The use of the pump referred to in this manual must be entrusted to qualified personnel with a knowledge of
hydraulics and electrical systems.
The manufacturer reserves the right to update the product and/or the user’s manual without the obligation to revise
previous versions. It is however, possible to contact the Engineering Department for the latest revision in use.
The pump, and any accessories mounted on it, should be carefully checked immediately on receipt and in the event of
any discrepancy or complaint the Dropsa SpA Sales Department should be contacted without delay.
DROPSA S.p.A. declines to accept any responsibility for injuries to persons or damage to property in the event of the
non-observance of the information presented in this manual.
Any modification to component parts of the system or the different destination of use of this system or its parts
without prior written authorization from DROPSA S.p.A. will absolve the latter from any responsibility for injury or
damage to persons and/or property and will release them from all obligations arising from the guarantee.
2. GENERAL DESCRIPTION The features which distinguish this pump are:
high performance, simplicity of construction, modularity, The simplicity of construction guarantees long life, reliability and simplified and reduced maintenance. The modularity
of the components allows the system engineer to construct the lubrication unit to meet the specific needs of the
lubrication system it is serving.
3. PRODUCT MACHINE IDENTIFICATION Machine identification yellow label is located on the front side of the reservoir and contains product serial number,
input voltage and details of the operating parameters.
4. TECHNICAL SPECIFICATIONS
TECHNICAL CHARACTERISTICS Pressure 300 Bar ( 4410 psi) 3 Fixed delivery max (pumping Ø6 mm)
10 cm / min (0.55 cu. in/min) 3 Fixed delivery max (pumping Ø8 mm) 17 cm / min (1.03 cu. in/min)
3 Adjustable delivery max (pumping Ø6 mm) 1,4-10 cm / min (0.085 - 0.61 cu. in/min)
3 Adjustable delivery max (pumping Ø6 mm) 2,5-17 cm / min (0.15 - 1.03 cu. in/min)
No. pumpings 1÷3 Capacity reservoir 5 kg. (11 lb) Lubricant Grease Lubricant Viscosity
000 ÷ 2 NLGI Working Temperature + 10° C ÷ + 40° C (+50° ÷ +104° F) Motor Voltage
220/380 V – 50/60 Hz Power absorption 90 W
2
It is recommended that this manual is carefully kept in good condition and is always available to persons requiring to
consult it.
To request further copies, updates or clarifications with respect to this manual contact the Engineering Department at
Dropsa SpA.
The use of the pump referred to in this manual must be entrusted to qualified personnel with a knowledge of
hydraulics and electrical systems.
The manufacturer reserves the right to update the product and/or the user’s manual without the obligation to revise
previous versions. It is however, possible to contact the Engineering Department for the latest revision in use.
The pump, and any accessories mounted on it, should be carefully checked immediately on receipt and in the event of
any discrepancy or complaint the Dropsa SpA Sales Department should be contacted without delay.
DROPSA S.p.A. declines to accept any responsibility for injuries to persons or damage to property in the event of the
non-observance of the information presented in this manual.
Any modification to component parts of the system or the different destination of use of this system or its parts
without prior written authorization from DROPSA S.p.A. will absolve the latter from any responsibility for injury or
damage to persons and/or property and will release them from all obligations arising from the guarantee.
2. GENERAL DESCRIPTION The features which distinguish this pump are:
high performance, simplicity of construction, modularity, The simplicity of construction guarantees long life, reliability and simplified and reduced maintenance. The modularity
of the components allows the system engineer to construct the lubrication unit to meet the specific needs of the
lubrication system it is serving.
3. PRODUCT MACHINE IDENTIFICATION Machine identification yellow label is located on the front side of the reservoir and contains product serial number,
input voltage and details of the operating parameters.
4. TECHNICAL SPECIFICATIONS
TECHNICAL CHARACTERISTICS Pressure 300 Bar ( 4410 psi) 3 Fixed delivery max (pumping Ø6 mm)
10 cm / min (0.55 cu. in/min) 3 Fixed delivery max (pumping Ø8 mm) 17 cm / min (1.03 cu. in/min)
3 Adjustable delivery max (pumping Ø6 mm) 1,4-10 cm / min (0.085 - 0.61 cu. in/min)
3 Adjustable delivery max (pumping Ø6 mm) 2,5-17 cm / min (0.15 - 1.03 cu. in/min)
No. pumpings 1÷3 Capacity reservoir 5 kg. (11 lb) Lubricant Grease Lubricant Viscosity
000 ÷ 2 NLGI Working Temperature + 10° C ÷ + 40° C (+50° ÷ +104° F) Motor Voltage
220/380 V – 50/60 Hz Power absorption 90 W
2
常见问题
关于Dropsa品牌Dropsa 1A-0299042C Pump Element产品的常见问题。Imtek Engineering随时准备帮助您在United States采购Dropsa的Dropsa 1A-0299042C Pump Element。
Imtek Engineering通过可信赖的供应渠道采购正品Dropsa产品，并以具有竞争力的价格向United States客户提供。
