Dynisco 14804000 Panel Indicator

Tagline
Outputs & Options Alarm Relays:
Contacts Single Relay SPDT 2 Amp resistive at 240V AC, >500,000 operations. Latching or non-latching.
Duel Relay SPST 2 Amp resistive at 240V >200,000 operations. Reinforced safety isolation from inputs
and other outputs.
DC Linear Retrainsmit Outputs:
0 to 20mA, 4 to 20mA into 500Ω max, 0 to 10V, 2 to 10V, 0 to 5V into 500Ω min.
Accuracy ±0.25% at 250Ω (degrades linearly to 0.5% for increasing burden to specified limits)
External reset of latched relay, stored alarm 1 elapsed time, stored min/max PV values or initiate tare function. Action
occurs on high (3 to 5VDC) to low <0.8VDC, or Open to Closed transition
Logic Input:
Operating & Environmental Temperature & RH:
Power Supply:
Front Panel Protection Standards:
0 to 55°C (-20 to 80°C storage), 20 to 95% RH non-condensing 110 to 240V ±10% (90 to 264V) 50/60Hz 7.5VA
(optional 20 to 48V AC 7.5VA/22 to 65V DC 5 watts)
IEC IP66 (Behind panel protection is IP20) CE. Pollution Degree 2, Installation Category II
Ordering Guide 1480-X-X-X-X Number of Alarms 1 = Single Alarm 4 = Dual Alarm Independent Gnd
For Future Use 0 = Not Installed Retransmission 0 = Not Installed 1 = Installed
Dimensions
Supply Voltage 0 = 100 to 240Vac Mains 1 = 24Vac/DC