Industrial spare parts & engineering solutions since 2001.
德国仓直发，全球快速配送
多种支付方式多种付款选项
Fife M431027 Web Edge Sensor
技术数据表 / 产品文档
欢迎联系我们！我们会在 24 个工作小时内（不含周末及节假日）确认库存状态和预计交期。
产品描述
Fife的产品（包括Fife M431027 Web Edge Sensor）通过平行进口渠道采购，并快速可靠地交付给United States的客户。Imtek Engineering以具有竞争力的价格提供正品Fife零部件。即使Fife M431027 Web Edge Sensor未在我们的网站上列出，您也可以随时申请报价——我们的团队将迅速响应并为您提供专属报价。
United StatesFIFE DSE-41
DIGITAL ULTRASONIC SENSOR
Because of its compact size and temperature stability, the digital ultrasonic sensor DSE-41 is the ideal solution for
guiding clear films and most opaque webs.
The DSE - 41 uses ultrasonic waves to measure the lateral position of the web material. The proportional band allows
significant guide point adjustment. The DSE - 41 is often used in pairs for centre guiding when web width variations are
limited. The DSE - 41 is insensitive to ambient light and it’s used to guide most of the opaque material and clear films.
When used with acoustically permeable material a calibration between the sensor and the material is necessary.
It is possible to operate the DSE - 41 with either a supply voltage of 12 V or 24 V. The output signal
would automatically be switched over in that case.
In 12 V supply mode the sensor provides an output signal from 0 to 10 mA and can be connected to all
available Fife web guide processors.
In 24 V supply mode the sensor supplies an output signal between 4 and 20 mA and can be easily
connected to a PLC as well.
The DSE - 41 has a built-in LED display, visible from both sides, and shows directly on the sensor
information about the operating status like for instance the existence of the supply voltage, position of
the edge of the web inside the field of view or error messages.
An optional digital production data acquisition to Fife D-MAXE controller extends the range of
applications for the DSE - 41 inside the digital network environment. Additional sensor data can be provided to
other hardware equipment if the Fife D-MAXE is linked appropriately to the network.
• Insensitive to ambient light
KEY FEATURES
GENERAL SPECIFICATIONS
• Insensitive to electrostatic discharge
Proportional band 7,6 mm
• Low power consumption
Source Ultrasonic 150 kHz Weight 340 g Operating temperature 5 ° - 60 °C
Protection class
IP 54 Power supply 10 - 28 V
Output signal 0 - 10 mA 4 - 20 mA optional digital data exchange RS-485 Linearity
5 % maximum error (at 10 % to 90 % of signal) Plane change 5 % maximum error (at 20 % to
80 % of gap width) Temperature drift 5 % maximum error (at 10 °C to 40 °C)
• Temperature stabilized
• It doesn’t affect photosensitive paper or film
• Suitable for thin and clear film or foil
• Can be used for new guiding systems as well as for an upgrade of existing
systems
• Fast, easy and robust mounting due to multiple mounting brackets and sensor positioners
• Can be connected to all available Fife web guide processors
DIGITAL ULTRASONIC SENSOR
Because of its compact size and temperature stability, the digital ultrasonic sensor DSE-41 is the ideal solution for
guiding clear films and most opaque webs.
The DSE - 41 uses ultrasonic waves to measure the lateral position of the web material. The proportional band allows
significant guide point adjustment. The DSE - 41 is often used in pairs for centre guiding when web width variations are
limited. The DSE - 41 is insensitive to ambient light and it’s used to guide most of the opaque material and clear films.
When used with acoustically permeable material a calibration between the sensor and the material is necessary.
It is possible to operate the DSE - 41 with either a supply voltage of 12 V or 24 V. The output signal
would automatically be switched over in that case.
In 12 V supply mode the sensor provides an output signal from 0 to 10 mA and can be connected to all
available Fife web guide processors.
In 24 V supply mode the sensor supplies an output signal between 4 and 20 mA and can be easily
connected to a PLC as well.
The DSE - 41 has a built-in LED display, visible from both sides, and shows directly on the sensor
information about the operating status like for instance the existence of the supply voltage, position of
the edge of the web inside the field of view or error messages.
An optional digital production data acquisition to Fife D-MAXE controller extends the range of
applications for the DSE - 41 inside the digital network environment. Additional sensor data can be provided to
other hardware equipment if the Fife D-MAXE is linked appropriately to the network.
• Insensitive to ambient light
KEY FEATURES
GENERAL SPECIFICATIONS
• Insensitive to electrostatic discharge
Proportional band 7,6 mm
• Low power consumption
Source Ultrasonic 150 kHz Weight 340 g Operating temperature 5 ° - 60 °C
Protection class
IP 54 Power supply 10 - 28 V
Output signal 0 - 10 mA 4 - 20 mA optional digital data exchange RS-485 Linearity
5 % maximum error (at 10 % to 90 % of signal) Plane change 5 % maximum error (at 20 % to
80 % of gap width) Temperature drift 5 % maximum error (at 10 °C to 40 °C)
• Temperature stabilized
• It doesn’t affect photosensitive paper or film
• Suitable for thin and clear film or foil
• Can be used for new guiding systems as well as for an upgrade of existing
systems
• Fast, easy and robust mounting due to multiple mounting brackets and sensor positioners
• Can be connected to all available Fife web guide processors
常见问题
关于Fife品牌Fife M431027 Web Edge Sensor产品的常见问题。Imtek Engineering随时准备帮助您在United States采购Fife的Fife M431027 Web Edge Sensor。
Imtek Engineering通过可信赖的供应渠道采购正品Fife产品，并以具有竞争力的价格向United States客户提供。
