Industrial spare parts & engineering solutions since 2001.
德国仓直发，全球快速配送
多种支付方式多种付款选项
Gestra MK35-2S
产品描述
Gestra的产品（包括Gestra MK35-2S）通过平行进口渠道采购，并快速可靠地交付给United States的客户。Imtek Engineering以具有竞争力的价格提供正品Gestra零部件。即使Gestra MK35-2S未在我们的网站上列出，您也可以随时申请报价——我们的团队将迅速响应并为您提供专属报价。
United StatesSteam Traps MK 35/2S
Data sheet 810739-02 Issue: 03-2024
Thermostatic Steam Trap
MK 35/2S, MK 35/2S3 PN40/CL300
DN 25, NPS 1" Description Thermostatic steam traps with corrosion resistant 5H2 membrane regulator capsule, unaffected by water hammer and with
flat seal. With integral strainer. Installation in any position.
The “H” version discharges the condensate supercooled to approx. 5 K. The superheating of the steam at the membrane
regulator capsule must not exceed 5 °C.
Design
MK 35/2S With two 5H2 membrane regulator capsules. For condensate flowrates up to e.g. 1100 kg/h at Δp 5 bar.
MK 35-2S, MK 35-2S3
MK 35/2S3 With three 5H2 membrane regulator capsules. For condensate flowrates up to e.g. 1700 kg/h at Δp 5 bar
Fluids The equipment is designed for the following fluids (in accordance with the EU Pressure Equipment Directive or Pressure
Equipment (Safety) Regulations in the UK):
MK 35/2S, MK 35/2S3 ■
Group 2 fluids
Chemical and corrosive influences must be taken into consideration.
Use in potentially explosive atmospheres The equipment does not have its own potential source of ignition (as per ATEX Directive). Please note the following:
Once installed, static electricity may arise between the equipment and the connected system. If the equipment is used in
potentially explosive atmospheres, the plant manufacturer or owner is responsible for discharging or preventing possible
static charge.
If it is possible for fluid to escape, e.g. through actuating mechanisms or leaks in threaded joints, the plant manufacturer or
owner must take this into consideration when dividing the area into zones.
Function
MK 35-2S
The equipment is used for discharging condensate from steam or for venting steam lines.
The condensate is discharged by two or three membrane regulator capsules and associated nozzle holder insert.
Material Component
EN
Body, cover
1.0460
SA105
Screw
1.7225
A193 B7/SA193 B7
Gasket Membrane regulator capsule Other internal parts
MK 35-2S3
Connections ■ ■ ■ ■ ■ ■
Flange EN 1092-1 B1, PN 40 Flange ASME B 16.5, Class 150 RF Flange ASME B 16.5, Class 300 RF
Screwed socket ISO 228-1, G Screwed socket ASME B 16.11, NPT Socket-weld end DIN EN 12760/ASME B 16.11, CL 3000
ASTM/ASME
Graphite/CrNi Hastelloy®/Stainless steel Stainless steel
Thermostatic Steam Trap
MK 35/2S, MK 35/2S3 PN40/CL300
DN 25, NPS 1" Description Thermostatic steam traps with corrosion resistant 5H2 membrane regulator capsule, unaffected by water hammer and with
flat seal. With integral strainer. Installation in any position.
The “H” version discharges the condensate supercooled to approx. 5 K. The superheating of the steam at the membrane
regulator capsule must not exceed 5 °C.
Design
MK 35/2S With two 5H2 membrane regulator capsules. For condensate flowrates up to e.g. 1100 kg/h at Δp 5 bar.
MK 35-2S, MK 35-2S3
MK 35/2S3 With three 5H2 membrane regulator capsules. For condensate flowrates up to e.g. 1700 kg/h at Δp 5 bar
Fluids The equipment is designed for the following fluids (in accordance with the EU Pressure Equipment Directive or Pressure
Equipment (Safety) Regulations in the UK):
MK 35/2S, MK 35/2S3 ■
Group 2 fluids
Chemical and corrosive influences must be taken into consideration.
Use in potentially explosive atmospheres The equipment does not have its own potential source of ignition (as per ATEX Directive). Please note the following:
Once installed, static electricity may arise between the equipment and the connected system. If the equipment is used in
potentially explosive atmospheres, the plant manufacturer or owner is responsible for discharging or preventing possible
static charge.
If it is possible for fluid to escape, e.g. through actuating mechanisms or leaks in threaded joints, the plant manufacturer or
owner must take this into consideration when dividing the area into zones.
Function
MK 35-2S
The equipment is used for discharging condensate from steam or for venting steam lines.
The condensate is discharged by two or three membrane regulator capsules and associated nozzle holder insert.
Material Component
EN
Body, cover
1.0460
SA105
Screw
1.7225
A193 B7/SA193 B7
Gasket Membrane regulator capsule Other internal parts
MK 35-2S3
Connections ■ ■ ■ ■ ■ ■
Flange EN 1092-1 B1, PN 40 Flange ASME B 16.5, Class 150 RF Flange ASME B 16.5, Class 300 RF
Screwed socket ISO 228-1, G Screwed socket ASME B 16.11, NPT Socket-weld end DIN EN 12760/ASME B 16.11, CL 3000
ASTM/ASME
Graphite/CrNi Hastelloy®/Stainless steel Stainless steel
常见问题
关于Gestra品牌Gestra MK35-2S产品的常见问题。Imtek Engineering随时准备帮助您在United States采购Gestra的Gestra MK35-2S。
Imtek Engineering通过可信赖的供应渠道采购正品Gestra产品，并以具有竞争力的价格向United States客户提供。
