Industrial spare parts & engineering solutions since 2001.
德国仓直发，全球快速配送
多种支付方式多种付款选项
Gestra SMK22-51
产品描述
Gestra的产品（包括Gestra SMK22-51）通过平行进口渠道采购，并快速可靠地交付给United States的客户。Imtek Engineering以具有竞争力的价格提供正品Gestra零部件。即使Gestra SMK22-51未在我们的网站上列出，您也可以随时申请报价——我们的团队将迅速响应并为您提供专属报价。
United StatesSteam Trap STERIline® SMK 22, SMK 22-51
Data sheet 810480-02
Steam Trap STERIline®
SMK 22, SMK 22-51 suitable for clamp connections to DIN 32676, for pipes to DIN 11866 (DIN 11850, ISO 1127, ASME-BPE)
PN 10
L1
Lw
L1
Issue: 11/17
Description The thermostatic steam trap features a minimum stagnant area and corrosion-resistant thermostatic capsule with membrane
regulator, which is unaffected by water hammer. Used for removing condensate and air venting steam in sterile and aseptic
applications.
D1
SMK 22 with joint clamp and butt-weld ends
Lc
The thermostatic capsule with membrane regulator and rolling ball features a self-centring ball stud that can move freely,
ensuring a steam-tight seal that is unaffected by dirt particles.
D1
The regulator (evaporation thermostat) is highly sensitive due to its very small size. The steam trap removes condensate
throughout the entire pressure/temperature range without delay, and vents automatically. The opening temperature is approx.
5 K below boiling point.
All parts in contact with fluid are made of stainless steel. The body gasket is of PTFE (FPM) or EPDM, in accordance with the
requirements of the FDA (Food and Drug Administration).
The surface roughness Ra of the wetted surface is ≤ 0.8 μm, optionally ≤ 0.6 μm or ≤ 0.4 μm (SMK 22 only).
Pressure/temperature ratings SMK 22-51
PMA (max. admissible service pressure) [bar]g
10
10
TMA (max. admissible service temperature) [°C]
150
EPDM 1)
185
185
PTFE (with FPM core) 1)
6
6
L1
TMA (max. admissible service temperature) [°C] Δ PMX [bar]
D1
1)
SMK 22, screwed, with butt-weld ends
Materials
SMK 22
Lw
L1
SMK 22 with joint clamp and clamp connections
Body gasket
Complies with FDA requirements
SMK 22-51
Body
1.4435
1.4404
Body gasket
EPDM
PTFE (with FPM core)
Optional body gasket Thermostatic capsule with membrane regulator
FEP (with FPM core) Hastelloy / 1.4571
Hastelloy / 1.4571
Spring
1.4310
1.4310
Joint clamp
1.4408
1.4408
Optional hexagon nut
1.4571
1.4571
Dimensions
SMK 22 joint clamp and SMK screw version 22-51
Lw
L1
Distance of steam trap from temperature measuring point
SMK 22
Butt-weld ends
Lw
83
90
Clamp
Lc
65
65
Butt-weld ends
L1
25
20
D1
105
120
D1
SMK 22-51 with joint clamp and butt-weld ends
SMK 22 joint clamp and SMK screw version 22-51
25 – 40 cm
L1
Weights
Butt-weld ends, [kg] clamp
< 1 kg
< 1 kg
Lc
Distance between steam traps and temperature measuring point
Pipe dimensions of butt-weld ends Nominal size
D1
SMK 22-51 with joint clamp and clamp connections
EN ISO 1127, series 1
DIN 11850, series 2
ASME BPE With tolerances to DIN 32676
DN inch dxs dxs dxs
8 ¼" 13.5 x 1.6
10 3/8"
17.2 x 1.6 13.0 x 1.5
15 20 ½" ¾" 21.3 x 1.6 26.9 x 1.6 19.0 x 1.5 23.0 x 1.5 12.7 x 1.65 19.05 x 1.65
25 1" 33.7 x 2.0 29.0 x 1.5 24.4 x 1.65
Steam Trap STERIline®
SMK 22, SMK 22-51 suitable for clamp connections to DIN 32676, for pipes to DIN 11866 (DIN 11850, ISO 1127, ASME-BPE)
PN 10
L1
Lw
L1
Issue: 11/17
Description The thermostatic steam trap features a minimum stagnant area and corrosion-resistant thermostatic capsule with membrane
regulator, which is unaffected by water hammer. Used for removing condensate and air venting steam in sterile and aseptic
applications.
D1
SMK 22 with joint clamp and butt-weld ends
Lc
The thermostatic capsule with membrane regulator and rolling ball features a self-centring ball stud that can move freely,
ensuring a steam-tight seal that is unaffected by dirt particles.
D1
The regulator (evaporation thermostat) is highly sensitive due to its very small size. The steam trap removes condensate
throughout the entire pressure/temperature range without delay, and vents automatically. The opening temperature is approx.
5 K below boiling point.
All parts in contact with fluid are made of stainless steel. The body gasket is of PTFE (FPM) or EPDM, in accordance with the
requirements of the FDA (Food and Drug Administration).
The surface roughness Ra of the wetted surface is ≤ 0.8 μm, optionally ≤ 0.6 μm or ≤ 0.4 μm (SMK 22 only).
Pressure/temperature ratings SMK 22-51
PMA (max. admissible service pressure) [bar]g
10
10
TMA (max. admissible service temperature) [°C]
150
EPDM 1)
185
185
PTFE (with FPM core) 1)
6
6
L1
TMA (max. admissible service temperature) [°C] Δ PMX [bar]
D1
1)
SMK 22, screwed, with butt-weld ends
Materials
SMK 22
Lw
L1
SMK 22 with joint clamp and clamp connections
Body gasket
Complies with FDA requirements
SMK 22-51
Body
1.4435
1.4404
Body gasket
EPDM
PTFE (with FPM core)
Optional body gasket Thermostatic capsule with membrane regulator
FEP (with FPM core) Hastelloy / 1.4571
Hastelloy / 1.4571
Spring
1.4310
1.4310
Joint clamp
1.4408
1.4408
Optional hexagon nut
1.4571
1.4571
Dimensions
SMK 22 joint clamp and SMK screw version 22-51
Lw
L1
Distance of steam trap from temperature measuring point
SMK 22
Butt-weld ends
Lw
83
90
Clamp
Lc
65
65
Butt-weld ends
L1
25
20
D1
105
120
D1
SMK 22-51 with joint clamp and butt-weld ends
SMK 22 joint clamp and SMK screw version 22-51
25 – 40 cm
L1
Weights
Butt-weld ends, [kg] clamp
< 1 kg
< 1 kg
Lc
Distance between steam traps and temperature measuring point
Pipe dimensions of butt-weld ends Nominal size
D1
SMK 22-51 with joint clamp and clamp connections
EN ISO 1127, series 1
DIN 11850, series 2
ASME BPE With tolerances to DIN 32676
DN inch dxs dxs dxs
8 ¼" 13.5 x 1.6
10 3/8"
17.2 x 1.6 13.0 x 1.5
15 20 ½" ¾" 21.3 x 1.6 26.9 x 1.6 19.0 x 1.5 23.0 x 1.5 12.7 x 1.65 19.05 x 1.65
25 1" 33.7 x 2.0 29.0 x 1.5 24.4 x 1.65
常见问题
关于Gestra品牌Gestra SMK22-51产品的常见问题。Imtek Engineering随时准备帮助您在United States采购Gestra的Gestra SMK22-51。
Imtek Engineering通过可信赖的供应渠道采购正品Gestra产品，并以具有竞争力的价格向United States客户提供。
