Industrial spare parts & engineering solutions since 2001.
德国仓直发，全球快速配送
多种支付方式多种付款选项
MOOG E124-204-400
产品描述
MOOG的产品（包括MOOG E124-204-400）通过平行进口渠道采购，并快速可靠地交付给United States的客户。Imtek Engineering以具有竞争力的价格提供正品MOOG零部件。即使MOOG E124-204-400未在我们的网站上列出，您也可以随时申请报价——我们的团队将迅速响应并为您提供专属报价。
United StatesSPECIFICATIONS Electrical Stroke:
From 2 inches to 100 inches
Ripple:
Less than 0.8% of full output
Zero Output:
Either end of transducer (factory set)
Output Voltage:
0 to +10 VDC (bipolar also available)
Zero Adjustment:
Nominal 2% of full stroke
Special Output:
Pulse width modulated output (0 V to +12 V)
Linearity:
Less than ±0.05% of full stroke
Temperature Range:
0°C (32°F) to 50°C (122°F)
Repeatability:
Better than ±0.02% of full stroke
Connector:
DIN 41612 C
Temperature Coefficient:
0.013% per degree C
Form Factor:
Eurocard 100 x 160 mm, 7 HP, 3 U
Frequency Response:
Typical 400 Hz for 20 inch stroke
Weight:
0.38 lb (0.17 kg)
NE124-204 Series Temposonics™ Signal Conditioner
The Temposonics™ Signal Conditioner card is designed to provide the necessary power supplies and signal conditioning to drive a range of
Temposonics™ transducers.The card is factory set to drive a specific stroke
length.Trimpots, which adjust zero and gain, are used to compensate for minor
differences between transducers of the same nominal stroke length.Transducer
position is represented by an analog voltage.The inverse of this voltage and a
pulse width modulated signal are also available.
The NE124-204 Temposonics™ Signal Conditioner card is a forward compatible replacement for the E124-204.
FEATURES ➢ ➢ ➢ ➢ ➢ ➢ ➢
Analog output Infinite resolution Absolute measurement Zero adjustment Gain control
±15 VDC supplies
PWM output
ADJUSTMENTS Zero (R17) – Adjusts null of outputs for zero transducer conditions. Used
for ‘fine’ tuning the DC analog output at full retract and full extend positions.
(Factory set – front panel access)
ORDER NUMBER NE124-204-x (consult factory)
FUNCTION SELECTION J1 Analog Output Jumper: Select ‘on’ for DC analog output at Pin-25
and Pin-32. Select ‘off’ for DC analog output on Pin-25 only. (Factory set for
Pin-25.) J2 Inverse Analog Output Jumper: Select ‘on’ for inverse analog output
at Pin-27 and Pin-31. Select ‘off’ for inverse analog output on Pin-27 only.
(Factory set for Pin-27.)
Gain (R34) – Adjusts gain to the exact output option change for a zero to
full displacement magnet movement. . Used for ‘fine’ tuning the DC analog
output at full retract and full extend positions. (Factory set – PCB mtg. only –
not accessible on front panel)
From 2 inches to 100 inches
Ripple:
Less than 0.8% of full output
Zero Output:
Either end of transducer (factory set)
Output Voltage:
0 to +10 VDC (bipolar also available)
Zero Adjustment:
Nominal 2% of full stroke
Special Output:
Pulse width modulated output (0 V to +12 V)
Linearity:
Less than ±0.05% of full stroke
Temperature Range:
0°C (32°F) to 50°C (122°F)
Repeatability:
Better than ±0.02% of full stroke
Connector:
DIN 41612 C
Temperature Coefficient:
0.013% per degree C
Form Factor:
Eurocard 100 x 160 mm, 7 HP, 3 U
Frequency Response:
Typical 400 Hz for 20 inch stroke
Weight:
0.38 lb (0.17 kg)
NE124-204 Series Temposonics™ Signal Conditioner
The Temposonics™ Signal Conditioner card is designed to provide the necessary power supplies and signal conditioning to drive a range of
Temposonics™ transducers.The card is factory set to drive a specific stroke
length.Trimpots, which adjust zero and gain, are used to compensate for minor
differences between transducers of the same nominal stroke length.Transducer
position is represented by an analog voltage.The inverse of this voltage and a
pulse width modulated signal are also available.
The NE124-204 Temposonics™ Signal Conditioner card is a forward compatible replacement for the E124-204.
FEATURES ➢ ➢ ➢ ➢ ➢ ➢ ➢
Analog output Infinite resolution Absolute measurement Zero adjustment Gain control
±15 VDC supplies
PWM output
ADJUSTMENTS Zero (R17) – Adjusts null of outputs for zero transducer conditions. Used
for ‘fine’ tuning the DC analog output at full retract and full extend positions.
(Factory set – front panel access)
ORDER NUMBER NE124-204-x (consult factory)
FUNCTION SELECTION J1 Analog Output Jumper: Select ‘on’ for DC analog output at Pin-25
and Pin-32. Select ‘off’ for DC analog output on Pin-25 only. (Factory set for
Pin-25.) J2 Inverse Analog Output Jumper: Select ‘on’ for inverse analog output
at Pin-27 and Pin-31. Select ‘off’ for inverse analog output on Pin-27 only.
(Factory set for Pin-27.)
Gain (R34) – Adjusts gain to the exact output option change for a zero to
full displacement magnet movement. . Used for ‘fine’ tuning the DC analog
output at full retract and full extend positions. (Factory set – PCB mtg. only –
not accessible on front panel)
常见问题
关于MOOG品牌MOOG E124-204-400产品的常见问题。Imtek Engineering随时准备帮助您在United States采购MOOG的MOOG E124-204-400。
Imtek Engineering通过可信赖的供应渠道采购正品MOOG产品，并以具有竞争力的价格向United States客户提供。
