Ace HBS-35-150 Hydraulic Dampers

Hydraulic Dampers HBS-28 Adjustable, Without Free Travel , Compression and extension force 30 N to 3,000 N
End Fitting
Standard Dimensions Ø 8.1
A8
Ø 14
Ø8
Ø 28
16 M20x1.5
Stroke
1
11 Ø 20
Stroke L extended TYPES mm mm HBS-28-50 50 295 HBS-28-100 100 445 HBS-28-150
150 595 HBS-28-200 200 745 HBS-28-250 250 895 HBS-28-300 300 1,045 HBS-28-350
350 1,195 HBS-28-400 400 1,345 1 Max. extension force for all stroke lengths 3,000 N.
Ø 13
12
15 30 M8x1.25
16.5
D8
36° Ø8
16
24° Ø8
16
Ordering Example
1
Compression Force with MBS max.
N 3,000 3,000 3,000 3,000 3,000 3,000 2,500 2,000
Stud Thread B8 Angle Ball Joint C8 max. force 1,200 N
10
30
Clevis Fork D8 max. force 3,000 N
Ø 16
6
13 12
16
36
Ø 20
32
36
Model Type Prefix
Ø 13
P: Damping in both directions N: Damping on in stroke only M: Damping on out stroke only
X: Special model suffix
6 Ø 13
HBS-28-150-DD-M
Type (Hydraulic Damper) Body Ø (28 mm) Stroke (150 mm) Piston Rod End Fitting D8
Body End Fitting D8 Damping Direction (M = out stroke only)
32
Ø 12
8
G8
Compression Force max.
N 3,000 1,550 900 600 440 330 260 200
8
10
E8
20
Performance and Dimensions
M8x1.25
Eye A8 max. force 3,000 N
14
L+/- 2 mm extended + max 6 mm for adjustment setting
20
B8 C8
Ø 8.1
10 thick
10 thick
14
Radius R7
End Fitting
15 30
Mounting accessories see from page 194.
Swivel Eye E8 max. force 3,000 N
Ball Socket G8 max. force 1,200 N
30
Rod Shroud no retrofit Ø 32, L = Stroke + 50
90 37.5 20 thick M20x1.5
28.25 19
Ø 10
35
25
30
Technical Data
Ø 8.5
8
Swivel Mounting Block
MBS-28
HBS-28
Issue 08.2016 – Specifications subject to change
A8
C8
D8 E8 G8
MA8 E8
NA8
ME8 OA8 NE8
PA8
NG8 OE8 OG8 PE8 PG8
Compression and extension force: 30 N to 3,000 N Operating temperature range: -20 °C to +80 °C
Adjustment: Achieved by turning the piston rod in its fully extended or fully compressed position.
Clockwise rotation = increase of the damping Anti-clockwise rotation = decrease of the damping
Damping force adjustable before installation. The adjustment can add a max. of 6 mm to the L dimension.
Positive stop: External positive stops 1 mm to 1.5 mm before the end of stroke provided by the customer.
Material: Outer body: Zinc plated or coated steel; Piston rod: Hard chrome plated steel; End fittings: Zinc plated steel
Mounting: In any position Note: Increased break-away force if unit has not moved for some time.
End fittings: They are interchangeable and must be positively secured by the customer to prevent unscrewing.
Safety instructions: For long strokes with high forces use swivel mounting block MBS.
ACE Stoßdämpfer GmbH . PO Box 1510 . D-40740 Langenfeld . T +49 (0)2173 - 9226-4100 . F +49 (0)2173 - 9226-89 . [email protected] . www.ace-ace.com
181