CALYS 75 is a field documenting multifunction calibrator of high accuracy
within CALYS range. It is the perfect tool for advanced process maintenance and
use on test bench in all industries. Suitable for all field and lab
measurements, it can simultaneously measure and generate over two isolated
channels various signals of temperature, resistance, process, pressure and
frequency in one single instrument.
Providing extended functionalities (temperature
simulation, scaling, steps, synthesizer, statistical functions…), CALYS 75
makes advanced data exploitation and full data traceability easier, as well as
quick access to functions by menus.
The instrument simultaneously measures and simulates:
·
Temperature: Up to 0,014% RDG
·
Resistance: Up to 0,012% RDG, 4 K? range
·
Current: Up to 0,0175% RDG, 50 mA range
+ 24 V loop supply
·
Voltage: Up to 0,013% RDG, 50 V range
·
Frequency: Up to 0,005% RDG, 20 KHz
range (10 KHz in simulation)
·
When used with an external pressure
module (ref. ACL433), CALYS 75 can measure and simulate pressure (comparison
calibration with a pressure pump).
Using this user-friendly instrument, calibration tasks can be quickly carried
out over the whole process chain. Take the 900 g documenting process calibrator
to the field with you during the whole week with 10 calibration procedures
stored in the device. Run the procedure after connecting the probes to
the instrument (Easy connect system®) and save the results for onsite easy and
quick calibration. Back to the office, you can then upload the data on a
computer in order to issue customized calibration certificates with
dedicated calibration software DATACAL.
IP 54, fully protected by an antichoc rubber holster, CALYS 75 integrates
"easyconnect" terminals and a wide backlite display that makes it
easy to use in any severe or dark conditions.
Easy connection system
Connect your probes by
simply pushing on the terminal top and insert wires of up to 3 mm or 10 AWG
diameter and compensated thermocouple connectors.
Wires are held tight between two brass plates ensuring thermal stability
and a very good cold junction compensation for thermocouples.
This system also enables 4 mm banana plugs and security connectors to be
connected on the terminal top.
CALYS series, 4 models from basic use to advanced performances
Specifications
CALYS 50
CALYS 75
CALYS 100
CALYS 150
Top accuracy
200 ppm
130 ppm
50 ppm
Temperature accuracy
Thermocouples (14)
RTDs (12)
0.013% RDG for Tc K
0.012% RDG
0.01% RDG for Tc K
0.01% RDG
0.005% RDG for Tc K
0.006% RDG
DC current
+ Loop supply 24 V
Range
Accuracy
50 mA
0.0175% RDG
100 mA
0.007% RDG
DC voltage
Range
Accuracy
50 V IN / 20 V OUT
0.013% RDG
50 V
0.013% RDG
50 V
0.010% RDG
50 V
0.005% RDG
Frequency
Range
Accuracy
20 KHz IN / 10 KHz OUT
0.005% RDG
100 KHz
0.01% RDG
Resistance
Range
Accuracy
4000 ?
0.012% RDG
4000 ?
0.010% RDG
50 K?
0.006% RDG
Pressure
Range
Accuracy
Relative pressure: 30 bar / Absolute pressure: 1,000 bar
0.05% RDG
Compliance to standards
21 CFR Part 11
NADCAP Heat treatment AMS 2750
Additional functions
Advanced data exploitation: Scaling, relative measurement, simulation of
ramps and steps, synthetizer, square root, statistical functions
Transmitter function
Additional functions
Switch test
Calibration of transmitters
Additional functions
Comparison calibration
HART: Digital calibration and data transfer
Calibration of thermistors
Software
DATACAL calibration software for configuration and data management
Memory
10,000 data stored and recalled on screen as curve or list
