Atos PFG-327-D-RO Gear Pump

Table TA056-0/E
Gear pumps type PFC external gears - fixed displacement Available only on request
PFC are fixed displacement external gear pumps, axial hydraulic balancing,
simple and sturdy construction, low noise level Suitable for hydraulic oils or synthetic
fluids having similar lubricating characteristics Wide variety of displacements: from 1,6
up to 52 cm3/rev Max pressure up to 260 bar
햲 햳 햴 햵 햶 햷
1
body driving gear driven gear shaft inlet port outlet port
PFC-1
MODEL CODE
PFC
–
2
14
/
-
/*
**
Hydraulic symbol
Fixed displacement gear pump
Options on request
OUT
Series number
Direction of rotation (as viewed at the shaft end):
- = clockwise (supplied standard if not otherwise specified) S = counterclockwise
Note: PFC are not reversible. The direction of rotation is indicated by an arrow on the
pump casing; the same arrow shows also the direction of the oil flow (from the
inlet to the outlet port)
Size, see section 2: 1, 2, 3
Displacement [cm3/rev], see section 2 for PFC 1: 14, 20, 28, 35, 42, 49, 60, 74, 87, 99
for PFC 2: 07, 10, 11, 14, 16, 18, 21, 27, 35 for PFC 3: 27, 34, 40, 43, 54
Other displacements are available on request
2
IN
OPERATING CHARACTERISTICS at 1450 rpm (based on mineral oil ISO VG 46 at 50°C)
Model
PFC-114 PFC-120 PFC-128 PFC-135 PFC-142 PFC-149 PFC-160 PFC-174 PFC-187 PFC-199
PFC-207 PFC-210 PFC-211 PFC-214 PFC-216 PFC-218 PFC-221 PFC-227 PFC-235 PFC-327
PFC-334 PFC-340 PFC-343 PFC-354
Displacement cm3/rev 1,6 2,13 2,67 3,34 4,27 5,34 6,2 6,67 8,51 10,67 6,61
9,17 11,23 14,53 16,85 19,09 21,14 28,21 33,03 26,70 34,55 39,27 43,98 51.83
Max pressure (1)
Speed range rpm
(1) For intermittent duty, 10% higher peak pressures are admitted.
260 bar 650 - 4000 250 bar 230 bar 180 bar 140 bar
650 - 3500
600 - 4000 250 bar
600 - 3500 500 - 3500 500 - 3000
200 bar 130 bar 130 bar 250 bar 240 bar 240 bar 230 bar 210 bar
500 - 3000 500 - 2000
350 - 3000
350 - 2500
TA056