Atos QV-06/11 Flow Regulator

Table
C210-9/E
Flow control valves type QV-06 pressure compensated, two way, size 06 not ISO
QV are flow control valves with pressure compensator 햲: the controlled flow rate is
independent of pressure variations.
They are usually supplied with a built-in check valve 햳 to allow the free flow in the
opposite direction.
The flow is regulated by turning a graduate micrometer knob 햴. Clockwise rotation
increases the flow regulation.
Optional versions with locking key 햵 on the adjustment knob are available on
request.
Valves designed to operate in hydraulic systems with hydraulic mineral oil or
synthetic fluid having similar lubricating characteristics.
Size: 06 - not ISO Max flow: 24 l/min Max pressure: 250 bar QV-06
1
QV-06/*/K
MODEL CODE
QV
-
06
/
6
/
K
**
*
/
Seals material, see section 3:
= NBR
PE = FKM
BT = HNBR
Pressure compensated flow control valve Size: 06 Maximum adjustable flow rate:
1 = 1,5 l/min 11 = 11 l/min 6 = 6 l/min 16 = 16 l/min
2
Series number Options:
K = with lock key for the setting knob V = without by-pass check valve
24 = 24 l/min
HYDRAULIC CHARACTERISTICS
Hydraulic symbols
with check valve (standard)
Valve model Max regulated flow
[I/min]
Min regulated flow
[cm3/min]
without check valve (option /V)
QV-06/1
QV-06/6
QV-06/11
QV-06/16
QV-06/24
1,5
6
11
16
24
6,5
8
50 24
Max flow B씮A through check valve [l/min] Regulating Δp Max flow on port A
Max pressure 3
[bar]
3
3
5
[l/min]
24
[bar]
250
MAIN CHARACTERISTICS, SEALS AND FLUIDS - for other fluids not included in below table, consult our technical office
Assembly position Compliance
Ambient temperature Seals, recommended fluid temperature
Any position RoHS Directive 2011/65/EU as last update by 2015/863/EU
REACH Regulation (EC) n°1907/2006 Standard = -30°C ÷ +70°C /PE option = -20°C ÷ +70°C
/BT option = -40°C ÷ +70°C
NBR seals (standard) = -20°C ÷ +80°C, with HFC hydraulic fluids = -20°C ÷ +50°C
FKM seals (/PE option) = -20°C ÷ +80°C
HNBR seals (/BT option) = -40°C ÷ +60°C, with HFC hydraulic fluids = -40°C ÷ +50°C
Recommended viscosity
15÷100 mm2/s - max allowed range 2,8 ÷ 500 mm2/s
Max fluid contamination level
ISO4406 class 20/18/15 NAS1638 class 9, see also filter section at www.atos.com or KTF catalog
Hydraulic fluid Mineral oils Flame resistant without water Flame resistant with water
Suitable seals type NBR, FKM, HNBR
Classification HL, HLP, HLPD, HVLP, HVLPD
FKM
HFDU, HFDR
NBR, HNBR
HFC
Ref. Standard
DIN 51524
ISO 12922
C210