Bartec 07-3511-10N84LOCK Control Station Switch

2
ComEx Control and Indicating Devices Type 07-351*-**************
Operational Instruction (Translation) / EN
Explosion protection Notified Body Number Approved Body Number
0044 2503
ATEX/UKEX Ex type of protection
II 2 G Ex db eb IIC T6 Gb
II 2 G Ex db eb ia IIC T6 Gb
II 2 D Ex tb IIIC T80 °C Db -55 °C ≤Ta≤ +60 °C
Certification
CML 14 ATEX 3073X
CML 21 UKEX 3717X
IECEx Ex type of protection
Ex db eb IIC T6 Gb Ex db eb ia IIC T6 Gb Ex tb IIIC T80 °C Db -55 °C ≤Ta≤ +60 °C
Certification
IECEx CML14.0029X
Ambient temperature range
-55 °C to +60 °C (-67 °F to +140 °F)
Approved for zones
1, 2 and 21, 22
Applicable Documents
– Certificates –O peration instructions of the installed components –D
elivery note (includes a list of installed components) The retention and observation of these
documents is mandatory.
If limited components are used, the information of the correct usage can be found on shipping
documents and related certificates.
Note on instructions When working in hazardous areas, the safety of personnel and
equipment depends on compliance with the relevant safety regulations. The people in charge of installation and maintenance
bear a special responsibility. It is essential that they have an exact knowledge of the applicable rules and regulations.
The instructions provide a summary of the most important safety measures and must be read by everyone working with the product
so that they will be familiar with the correct handling of the product.
The instructions have to be kept for future reference and must be available throughout the expected life of the product.
Description ComEx is a flexible system that offers both standardized and also
customized local control and display stations.
Technical data Protection class
Up to IP66/IP67 (IEC 60529)
Rated insulation voltage
Max. AC 690 V
Rated current
Max. 690 V AC
Intrinsically safety parameters
Only for intrinsically safe devices:
Input voltage (Ui):
30 V Input current (Ii):
150 mA Input Power (Pi):
1W Inductance (Li):
negligible Capacitance (Ci):
negligible
Connection type
Terminals, 2.5 mm² Torque: 0.4 Nm (0.3 lb.ft)
PE conductor terminals
4 x 2.5 mm² Torque: 0.4 Nm (0.3 lb.ft)
Cable entry
Standard version:
–M 20 x 1.5 for cable with Ø 7 to 13 mm (0.27 to 0.51 in) Special version:
–M 20 x 1.5 for cable with Ø 11 to 14 mm (0.43 to 0.55 in) –M 25 x 1.5 for cable with Ø 12 to 17 mm
(0.47 to 0.67 in) –M 25 x 1,5 for cable with Ø 14 to 18 mm (0.55 to 0.71 in)
Enclosure material
Plastic (thermoplastic)
Enclosure Screws
M4 x 30 Torque: 0.7 Nm - 1.2 Nm (0.5 - 0.8 lb.ft)
Potential equalisation, external
M6 Torque: 3 Nm (2.2 lb.ft)
Dimensions
See page 6.
The standard enclosures, single (07-3511-…/07-3514-…), double (07-3512-…/07-3515-…) and triple (07-3513-…/07-3516-…)
can be combined with various actuators, switching modules, and luminous modules.
Special oil-resistant actuating elements are available.
01-3511-7D0002-B-12/2021-ESS-409352