Ebara
Ebara CMD 1.50 M Centrifugal Pump
Product Code:CMD 1.50 M
Description
Technical dataFlow ratefrom 1.2 to 60.5 m³/hTotal headFrom 5.2 to 57.0 mMax. working pressure6 bar for CMA 0.50-0.75-1.00
CMB 0.75-1.00-1.50-2.00-3.00
CMC, CMD
8 bar for CMA 1.50-2.00-3.00
CMB 4.00-5.50Max. temperature of the liquid+40°C for CMA 0.50-0.75-1.00
+90°C for the rest of the rangeMEI> 0.4Poles2Insulation classFProtection degreeIP44VoltageSingle-phase 1~230V ±10%
Three-phase 3~230/400V ±10%MaterialsPump bodyCast ironImpellerin PPE+PS with glass fibres for CMA 0.50 - 0.75 - 1.00
in brass for CMA 1.50 - 2.00 - 3.00
CMB 2.00 - 3.00 - 4.00 - 5.50
in cast iron for CMB 0.75 - 1.00 - 1.50, CMC, CMDShaftin AISI 416 (EN 1.4005) (integral) for CMA 0.50
in AISI 303 (EN 1.4305) (part in contact with liquid) for CMA 0.75-1.00-1.50-2.00-3.00
CMB 0.75-1.00-1.50-2.00-3.00
CMC 0.75-1.00, CMD 1.50-2.00-3.00
in AISI 304 (EN 1.4301) (part in contact with liquid) for CMB 4.00-5.50Mechanical sealCeramic/Carbon/NBR (standard)Motor supportin aluminium for CMA 0.50-0.75-1.00
CMB 0.75-1.00
CMC 0.75-1.00
in cast iron for the rest of the range
CMB 0.75-1.00-1.50-2.00-3.00
CMC, CMD
8 bar for CMA 1.50-2.00-3.00
CMB 4.00-5.50Max. temperature of the liquid+40°C for CMA 0.50-0.75-1.00
+90°C for the rest of the rangeMEI> 0.4Poles2Insulation classFProtection degreeIP44VoltageSingle-phase 1~230V ±10%
Three-phase 3~230/400V ±10%MaterialsPump bodyCast ironImpellerin PPE+PS with glass fibres for CMA 0.50 - 0.75 - 1.00
in brass for CMA 1.50 - 2.00 - 3.00
CMB 2.00 - 3.00 - 4.00 - 5.50
in cast iron for CMB 0.75 - 1.00 - 1.50, CMC, CMDShaftin AISI 416 (EN 1.4005) (integral) for CMA 0.50
in AISI 303 (EN 1.4305) (part in contact with liquid) for CMA 0.75-1.00-1.50-2.00-3.00
CMB 0.75-1.00-1.50-2.00-3.00
CMC 0.75-1.00, CMD 1.50-2.00-3.00
in AISI 304 (EN 1.4301) (part in contact with liquid) for CMB 4.00-5.50Mechanical sealCeramic/Carbon/NBR (standard)Motor supportin aluminium for CMA 0.50-0.75-1.00
CMB 0.75-1.00
CMC 0.75-1.00
in cast iron for the rest of the range
Technical Specifications
Technical data
| Flow rate | from 1.2 to 60.5 m³/h |
| Total head | From 5.2 to 57.0 m |
| Max. working pressure | 6 bar for CMA 0.50-0.75-1.00 CMB 0.75-1.00-1.50-2.00-3.00 CMC, CMD 8 bar for CMA 1.50-2.00-3.00 CMB 4.00-5.50 |
| Max. temperature of the liquid | +40°C for CMA 0.50-0.75-1.00 +90°C for the rest of the range |
| MEI | > 0.4 |
| Poles | 2 |
| Insulation class | F |
| Protection degree | IP44 |
| Voltage | Single-phase 1~230V ±10% Three-phase 3~230/400V ±10% |
Materials
| Pump body | Cast iron |
| Impeller | in PPE+PS with glass fibres for CMA 0.50 - 0.75 - 1.00 in brass for CMA 1.50 - 2.00 - 3.00 CMB 2.00 - 3.00 - 4.00 - 5.50 in cast iron for CMB 0.75 - 1.00 - 1.50, CMC, CMD |
| Shaft | in AISI 416 (EN 1.4005) (integral) for CMA 0.50 in AISI 303 (EN 1.4305) (part in contact with liquid) for CMA 0.75-1.00-1.50-2.00-3.00 CMB 0.75-1.00-1.50-2.00-3.00 CMC 0.75-1.00, CMD 1.50-2.00-3.00 in AISI 304 (EN 1.4301) (part in contact with liquid) for CMB 4.00-5.50 |
| Mechanical seal | Ceramic/Carbon/NBR (standard) |
| Motor support | in aluminium for CMA 0.50-0.75-1.00 CMB 0.75-1.00 CMC 0.75-1.00 in cast iron for the rest of the range |