Enerpac LUCD122-E100 Link Clamp

Clamp arms
for link clamps
Shown: LCAS-31 Collet-Lok® product line
Standard or custom built
• Available from Enerpac in standard or extended length
• Standard arm includes set screw and lock nut
• Long arm is machinable
Pressure vs clamping force
Standard arms are readily available from Enerpac to
-32 models
meet most applications. In applications that require a
800
custom designed arm, the Clamping force (lbs) u
machining information is supplied on page 57.
-122 models
Clamping forces
3000
Standard Arm (LCAS) 2 in.
2.38 in.
2.75 in.
Long Arm (LCAL)
700 600 500 400 300 200 100 0
0
1000
Important
2000
3000
4000
2000 1500 1000 500 0
1000
2000
-192 models
Clamping forces
4500
Standard Arm (LCAS) 2.75 in.
3.13 in.
3.50 in.
Long Arm (LCAL)
1600 1200
400
0
1000
2000
3000
4000
5000
Pressure (psi) u
-282 models
7000
5000 4000
Clamping forces
3000 2000 1000 0
0
1000
2000
3000
Pressure (psi) u
®
4000
5000
4000
5000
Clamping forces
3500 3000 2500 2000 1500 1000 500 0
0
1000
2000
3000
Pressure (psi) u
Standard Arm (LCAS) 4.75 in.
6.00 in.
7.00 in.
Long Arm (LCAL)
6000
3000
Standard Arm (LCAS) 3.50 in.
4.25 in.
5.13 in.
Long Arm (LCAL)
4000
800
0
2000
Pressure (psi) u
Clamping force (lbs) u
Allowable clamping area
-82 models
Clamping force (lbs) u
Clamp point must be within the boundaries of the anchor links on the clamp. Clamping
outside of this area will cause damage to the linkage, leading to premature failure.
56
Standard Arm (LCAS) 2.75 in.
3.13 in.
3.50 in.
Long Arm (LCAL)
2500
0
5000
Clamping forces
Pressure (psi) u
Clamping force (lbs) u
Linear clamps
Different length clamp arms will determine the amount of clamping force transferred to the workpiece. As the length increases, the clamping
force decreases.
Clamping force (lbs) u
1207300029
Work supports
Swing clamps
• Make your own custom arm to suit specific applications
4000
5000