Fife SE-26 Line Guide Sensor

FIFE SE - 26B LINE GUIDE SENSOR
The SE - 26B is a visible white LED light sensor that can be used to guide to the center of a line
or an edge. The sensor is compact and easy to install.
This sensor is capable of operating reliably on smooth, rough, matt or shiny web surfaces. The SE - 26B can be used in applications that have low
color contrast between the background and the printed line. One of the key features of the Fife SE-26B
sensor is its capability of detecting the edge of transparent plastic film.
Fife has a wide variety of sensor mounting brackets and positioning assemblies available for use with
the SE - 26B. The lens position may be altered to allow the sensor to operate at 90° from standard.
KEY FEATURES
• Small, lightweight sensor for guiding to the center or edge of a line
GENERAL SPECIFICATIONS Supply Current 50 mA, + 12 VDC 40 mA, - 12 VDC Temperature Range
Operating: - 0° to 60°C Storage:
- 0° to 80°C Illumination White LED Light Spot Size 1,2 x 4,2 mm Protection class
IP 65
Climate class 3K3 (EN60721) Relative Humidity 5 % to 85 % Pollution Degree
2 (IEC664-1) Sensor Output Range Line guiding:
- 20 mA bis + 20 mA Edge guiding:
- 20 mA bis + 10 mA
• Especially good in applications where contrast between background and printed line is low
• Capable of detecting the edge of transparent plastic film
• Provides reliable operation for glossy, reflective, or shiny materials
• Lens position may be altered to allow the sensor to operate at 90º from
standard
• Electrostatic discharge protected
• LED light source provides 100,000 lifetime hours