Industrielle Ersatzteile & Engineering-Lösungen seit 2001.
Moog Kit Connectors For Ds2020
Technische Datenblätter / Produktdokumentation
| Marke |  |
| Kategorie | Stecker |
| Produktname | Moog Kit Connectors For Ds2020 |
| Produktcode | Nicht angegeben |
Kontaktieren Sie uns! Innerhalb von 24 Geschäftsstunden (ohne Wochenenden und Feiertage) bestätigen wir Lagerstatus und voraussichtliche Lieferzeit.
Produktbeschreibung
Moog-Produkte, einschließlich Moog Kit Connectors For Ds2020, werden über Parallelimportkanäle bezogen und zuverlässig an unsere Kunden in United States geliefert. Imtek Engineering bietet Original-Moog-Teile zu wettbewerbsfähigen Preisen an. Auch wenn Moog Kit Connectors For Ds2020 nicht auf unserer Website gelistet ist, können Sie jederzeit ein Preisangebot anfordern – unser Team meldet sich umgehend.
United States3.4 Cables
If you are building your own cables or using motors from other manufacturers, please consult the
following table for recommended cable specifications.
DS2020 L50/L75
Feature
Section of the motor cable Section of the brake cable Maximum motor cable
length Maximum cable capacitance
L85
L125
2A - 4A - 6A
- 8A - 12A
16A
2.1 mm2 14 AWG
3.3 mm2 12 AWG
5.3 mm2 10 AWG
24A
32A
L165
L355
48A
64A
144A
192A
8.4 mm2 8 AWG
13 mm2 6 AWG
16 mm2 5 AWG
35 mm2 2 AWG
50 mm2 0 AWG
1 mm2 16 AWG 100 m
< 150 pF/m
Section of I/O
0,22-1 mm2 16 AWG
Section of AC power supply cable
2.1 mm2 14 AWG
3.3 mm2 12 AWG
5.3 mm2 10 AWG
8.4 mm2 8 AWG
13 mm2 6 AWG
16 mm2 5 AWG
35 mm2 2 AWG
50 mm2 0 AWG
Section of brake resistor cable
2.1 mm2 14 AWG
3.3 mm2 12 AWG
5.3 mm2 10 AWG
8.4 mm2 8 AWG
13 mm2 6 AWG
16 mm2 5 AWG
35 mm2 2 AWG
50 mm2 0 AWG
Section of 24
VDC cable
0.8 mm2 18 AWG
Section of ground cable
2.1 mm2 14 AWG
3.3 mm2 12 AWG
5.3 mm2 10 AWG
8.4 mm2 8 AWG
13 mm2 6 AWG
16 mm2 5 AWG
35 mm2 2 AWG
50 mm2 0 AWG
For the Metric/AWG conversion table, see Metric/AWG Conversion Table on page 169.
For the list of connector see Table on page 41.
i
The power and control cables (except those that go from the AC power supply to the
filter) must be shielded. To minimize noise, it is recommended that they are
separated from each other at a distance greater than 200 mm.
i
Shielded power cables can be grounded with a copper bar using a clamp that
ensures an efficient electrical contact area with larger cross-section of the ground
wire.
Particular attention should be given to the use of appropriate cables.
The cables and the motor winding may interact with the drive output stage to create an oscillating
circuit that increases the maximum voltage of the system. The parameters that contribute to
determining this maximum voltage are: the capacity and the length of the cables, the motor
inductance, and the frequency and rising edges of the PWM modulation. An analysis of these
parameters is recommended to prevent excessive voltages for the application. For applications
assistance, contact Applications Engineering.
PN: CDL67834, Rev. B April 2024
Page 55 of 171
Häufige Fragen
Häufig gestellte Fragen zu Moog Kit Connectors For Ds2020 von Moog. Imtek Engineering hilft Ihnen gerne, Moog Kit Connectors For Ds2020 von Moog in United States zu beschaffen.
Imtek Engineering bezieht originale Moog Produkte über vertrauenswürdige Lieferkanäle und stellt sie Kunden in United States zu wettbewerbsfähigen Preisen zur Verfügung.
