Mts Sensor ER-M-0400M-D34-1-V03

Output

Voltage 0…10 VDC or 10…0 VDC, 0…10 VDC and 10…0 VDC (controller input resistance RL > 5 k?)

Current 4…20 mA or 20…4 mA (minimum / maximum load: 0 / 500 ?)

Measured value Position

Measurement parameters

Resolution Infinite

Cycle time Typ. 0.3 ms < t < 2 ms (depending on stroke lengths)

Linearity ? ±0.02 % F.S. (minimum ±60 ?m)

Repeatability ? ±0.005 % F.S. (minimum ±20 ?m)

Operating conditions

Operating temperature ?40…+75 °C (?40…+167 °F)

Humidity 90 % rel. humidity, no condensation

Ingress protection 1,2 IP67 (if mating connectors are correctly fitted)

Shock test 100 g (single shock) IEC standard 60068-2-27

Vibration test 5 g / 10…2000 Hz IEC standard 60068-2-6 (resonance frequencies excluded)

EMC test Electromagnetic emission according to EN 61000-6-3

Electromagnetic immunity according to EN 61000-6-2

The sensor meets the requirements of the EC directives and is marked with .

Magnet movement velocity ? 5 m/s

Design / Material

Sensor electronics housing Aluminum

Guided driving rod Aluminum

Stroke length 50…1500 mm (2…60 in.)

Mechanical mounting

Mounting position Any

Mounting instruction Please consult the technical drawings and the brief instructions (document number: 551684)

Electrical connection

Connection type M12 (5 pin) male connector

Operating voltage +24 VDC (?15 / +20 %); UL recognition requires an approved power supply with energy

limitation (UL 61010-1), or Class 2 rating according to the National Electrical Code (USA) /

Canadian Electrical Code.

Ripple ? 0.28 Vpp

Current consumption 50…140 mA

Dielectric strength 500 VDC (DC ground to machine ground)

Polarity protection Up to ?30 VDC

Overvoltage protection Up to 36 VDC