Ropex PEX-W4 Current Transformer

Technical data Type of construction
Housing for installation in the electrical cabinet Snaps onto a top hat rail (DIN TS35 rail, 35mm) acc. to DIN EN 50022
Dimensions: 60 x 24mm; height: 89mm (incl. terminals)
Power dissipation
Max. 2.0W
Ambient conditions
Max. altitude: 2000m Ambient temperature: +5…+45°C Max. relative humidity: 80% at temperatures up to +31°C, decreasing linearly to
50% relative humidity at +45°C
Degree of protection
IP20
UL file
E464680
Installation
If several units are installed on one top hat rail (DIN TS35 rail), a clearance of at
least 20mm should be allowed between them.
The moving clip required for fastening must be facing down for mounting on a
horizontal top hat rail.
End holders to mechanically fix the current transformer must be fitted at both ends
for mounting on a vertical top hat rail.
Weight
Approx. 0.15kg (incl. connector plug-in parts)
Housing material
Plastic, polycarbonate, UL-90-V0
Connecting cable Type / cross-sections
Rigid or flexible; 0.2…1.5mm² (AWG 24…16) with plug-in connector Plug-in connectors:
Tightening torque: 0.5…0.6Nm (screwdriver: SZS 0.6x3.5mm)
If ferrules are used, they must be crimped in accordance with DIN 46228 and IEC / EN 60947-1.
This is essential for proper electrical contact in the terminals.
!
How to order Current transformer
Page 2
Art. No. 885106