Dynisco MDA462-M10-3.5C RANGE 0-350 BAR M10 Pressure Transducer

High Accuracy, Simple Installation, Repeatability And Reliability
Performance Characteristics
Temperature Influence
Pressure Range:
Diaphragm Max. Temperature:
Zero Shift Due to Temperature Change:
Accuracy:
Repeatability:
Resolution:
Maximum Overload (without influencing operating data):
Burst Pressure:
Material in Contact with Media:
0-17 bar to 0-2000 bar MDA420 ±0.5% f.s.v.
(up to 50 bar ±1% f.s.v.);
MDA460 ±1% f.s.v.
MDA420 ±0.1% f.s.v.
(up to 50 bar ±0.2% f.s.v.);
MDA460 ±0.2% f.s.v.
Infnite 2x pressure range for range 1000 and 1400 bar max.
1750 bar and max. 2400 bar for range 2000 bar 6x pressure range max.
3000 bar 15-5 PH SST (Mat. No.
1.4545) DyMax® coated
400°C MDA420 <0.2 bar / 10°C MDA460 <0.4 bar / 10°C
Housing Max. Temperature:
Zero Shift Due to Temperature Change:
120°C MDA420 ±0.2% f.s.v./10°C MDA460 ±1.0% f.s.v./10°C MDA420 ±0.1% f.s.v./10°C
(up to 50 bar ±0.2% f.s.v./10°C);
MDA460 ±0.4% f.s.v./10°C
Sensitivity Shift Due to Temperature Change:
Electrical Characteristics Configuration:
Internal Shunt Calibration:
Output Signal:
Supply Voltage:
Zero Balance:
Strain Resistance:
Leakage Resistance:
4-arm Wheatstone bridge strain gage 80% f.s.v ±0.5% MDA420 ±1.0% MDA460 3.33 mV/V
10 V DC, max. 12 V DC ±5% f.s.v MDA420 ±10% f.s.v MDA460 350Ω 1000MΩ at 50 Vdc
Ordering Guide for MDA420 and MDA460 Pressure Sensors MDA42X XXX XXX XX XXXX
Model MDA420 = 0.5% accuracy MDA460 = 1.0% accuracy Mounting Thread 1/2 = thread 1/2" 20 UNF 2A
M18 = thread M18 x 1.5
ACCESSORIES Cleaning Tool Kit, Machining Tool Kit, Indicator 1490, Process Readout UPR900, Process Controller ATC990. For
additional options please contact the factory.
Options Rigid Stem and Flexible Capillary 15 = stem length 152mm (standard)
Pressure Range 171)2) = 0-17 bar 351) = 0-35 bar 501) = 0-50 bar 1C = 0-100 bar
2C = 0-200 bar 3.5C = 0-350 bar 5C = 0-500 bar 7C = 0-700 bar 1M = 0-1000 bar
1.4M = 0-1400 bar 2M = 0-2000 bar 1) only MDA420 2) only M18