Industrial spare parts & engineering solutions since 2001.
- Products
- Dynisco
- Pressure Transmitter
- Dynisco MDT422F-M10-2C-7,6/152-A Melt Pressure Transmitters
Dynisco MDT422F-M10-2C-7,6/152-A Melt Pressure Transmitters
Technical Datasheets / Product Documentations
| Brand |  |
| Category | Pressure Transmitter |
| Product Name | Dynisco MDT422F-M10-2C-7,6/152-A Melt Pressure Transmitters |
| Product Code | MDT422F-M10-2C-7,6/152-A Melt Pressure Transmitters |
Contact with us! 24 business hours (excluding weekends and holidays) to confirm stock status and estimated delivery time.
Product Description
Dynisco products, including Dynisco MDT422F-M10-2C-7,6/152-A Melt Pressure Transmitters, are sourced through parallel import channels and delivered to our customers worldwide with speed and reliability. As an authorized trading partner, Imtek Engineering offers genuine Dynisco parts at competitive prices. Even if Dynisco MDT422F-M10-2C-7,6/152-A Melt Pressure Transmitters is not listed on our website, you are welcome to request a price quote — our team will respond promptly with a tailored offer.
Installation for media temperature up to 400°C
Flexible capillary between rigid stem and housing
Electrical built-in calibration
Various high level outputs
4-20 mA, 2-wire 0-10 V DC, 3/4-wire and other volt output signal ranges
Performance Characteristics Pressure Range: 0-17 bar to 0-2000 bar
Accuracy: MDT422F ±0.5% FSO (up to 50 bar ±1% FSO);
Repeatability: MDT422F ±0.1% FSO (up to 50 bar ±0.2% FSO); MDT462F ±0.2% FSO
Resolution: Infinite Maximum Overload (without in"uencing operating data): 2x pressure range for range 1000 and 1400
Burst Pressure: 6x pressure range max. 3000 bar Material in Contact with Media: 15-5 PH SST (Mat. No. 1.4545)
DyMax® coated Electrical Characteristics Confguration: 4-arm
Wheatstone bridge strain gage Internal Shunt Calibration: 80% of full scale ±1% Output Signal: 2-wire 4-20 mA
Supply Voltage: 12-36 Vdc Zero Balance: ±1%
Rezero Initiation: Locally via zero potentiometer, or remotely via short circuit between pins “D” and “F” Range Calibration 80% FSO: “Short circuit” between connections pins “E” and “F” at the sensor or externally from the control room
Load Resistance: Maximum 1200 at 36 Vdc Maximum 500 at 24 Vdc
Isolation Resistance: 1000M* at 50 Vdc
Temperature Influence Diaphragm: Max.
Temperature: 400ºC Zero Shift (due to temperature change): MDT422F X < 0.2 bar/10ºC MDT462F X < 0.4 bar/10ºC Housing: Max.
Temperature: 85ºC Zero Shift (due to temperature change): ±0.2% FSO/10ºC
Sensitivity Shift (due to temperature change): MDT422 X ±0.1% f.s.v./10ºC up to 50 bar ±0.2% f.s.v./10ºC MDT462 X ±0.4% f.s.v./10ºC
Approvals &Self Certifications CE: Directive 2004/108/EC ISO
Electrical Characteristics Configuration:
Internal Shunt-Calibration:
Leakage Resistance:
MDT422F 2-wire mA:
Output Signal:
Supply Voltage:
Zero Balance:
Load Resistance:
MDT422 K/L/M/N 3-wire V DC Output Signal:
Supply Voltage:
Load Resistance:
MDT422 G/H Output Signal:
Supply Voltage:
Load Resistance:
Temperature Influence Four-arm Wheatstone bridge strain gage (DMS) 80% of full scale ±5%
1000 MΩ at 50 V DC 4-20 mA 10-36 V DC 2% ±5% of full scale adjustable Maximum 1.2Ω at 36 V
K: 0-5 V DC, M: 1-6 V DC, L: 0-10 V DC, N: 1-11 V DC 15-32 V DC K: >5 kΩ, M: >5 kΩ,
L: >10 kΩ, N: >10 kΩ G: 0-5 V DC, H: 0-10 V DC dual ±10 to ±16 V DC single 19-32 V DC
G: >5 kΩ, H: >10 kΩ
Diaphragm:
Max. Temperature:
Zero Shift (due to temperature change):
Housing:
Max. Temperature:
Zero Shift (due to temperature change):
Sensitivity Shift (due to temperature change):
400ºC MDT422 X < 0.2 bar/10ºC MDT462 X < 0.4 bar/10ºC 85ºC ±0.2% f.s.v./10ºC
MDT422 X ±0.1% f.s.v./10ºC up to 50 bar ±0.2% f.s.v./10ºC MDT462 X ±0.4% f.s.v./10ºC
Technical Data and Operating Data Pressure Range:
Accuracy:
Repeatability:
Resolution:
Maximum Overload (without influencing operating data):
Burst Pressure:
Material in Contact with Media:
0 - 17 bar to 0 - 2000 bar
MDT 422 X ±0.5% f.s.v.
up to 50 bar ±1% f.s.v.
MDT 462 X ±1.0% f.s.v.
MDT 422 ±0.1% f.s.v.
up to 50 bar ±0.2% f.s.v.
MDT 462 X ±0.2% f.s.v.
infinite 2 x pressure range for range 1000 and 1400 bar max. 1750 bar and max. 2400 bar for range
2000 bar 6 x pressure range max. 3000 bar 15-5 Mat. No. 1.4545, DyMAX coated
Frequently Asked Questions
Frequently asked questions about Dynisco MDT422F-M10-2C-7,6/152-A Melt Pressure Transmitters by Dynisco. Imtek Engineering is ready to assist you in sourcing Dynisco MDT422F-M10-2C-7,6/152-A Melt Pressure Transmitters from Dynisco in United States.
United StatesImtek Engineering sources genuine Dynisco products through trusted supply channels and supplies them to customers in United States at competitive prices.
