Dynisco PT160-3M-H3 Pressure Sensors

Ideal For High Temperature Processes
Performance Characteristics Pressure Range (psi):
Accuracy:
Full Scale Output:
Zero Balance:
0 - 500, 0 - 750, 0 - 1,000, 0 - 2,500, 0 - 3,000, 0 - 5,000, 0 - 10,000
±0.5% full scale including linearity, hysteresis and repeatability PT130: 3 mV/V ±1.0%
typical (±2.0% maximum) PT140/150/160: 5 Vdc, 10 Vdc, 4 to 20 mA ±1.0% typical (±2.0% maximum)
±1.0% typical (±2.0% maximum)
Electrical Characteristics Input Resistance:
Output Resistance:
Internal Shunt Calibration:
Load Resistance:
Maximum Loop Resistance:
Wiring:
Output:
3 mV/V 0 to 5 Vdc (4 - wire) 1 to 6 Vdc (3 - wire) 0 to 10 Vdc (4 - wire)
1 to 11 Vdc (3 - wire) 4 to 20 mA (2 - wire)
PT130: 420 Ohms ±10% PT130: 370 Ohms ±10% PT130/150/160: 80% ±0.5% full scale typical
(±1.0% maximum) PT150/160:
2,000 Ohms minimum PT140: 0 to 1,100 Ohms from 14 to 36 Vdc Reverse polarity protection of
excitation leads Input Voltage:
10 Vdc recommended, 15 Vdc maximum 11 to 32 Vdc, ±12 to ±16 Vdc 11 to 32 Vdc
16 to 32 Vdc, ±14 to ±16 Vdc 16 to 32 Vdc 14 to 36 Vdc
Temperature Characteristics Operating Range:
Compensated Range
Temperature Effect On Zero:
Temperature Effect On Span:
PT130: -65°F to +250°F (-54°C to +120°C) PT140/150/160: -20°F to +185°F (-29°C to +85°C)
0°F to +150°F (-18°C to +66°C) PT130: ±0.005% full scale/°F (±0.009% full scale/°C) typical
(±0.01%/±0.018% maximum);
PT140/150/160: ±0.02% full scale/°F (±0.036% full scale/°C) ±0.02% full scale/°F
(±0.036% full scale/°C)
Mechanical Characteristics Safe Overpressure:
Burst Pressure:
Wetted Material:
Cover Material:
Weight:
2 x rated pressure 5 x rated pressure 17 - 4 PH, 15 - 5 PH stainless steel
303, 304 stainless steel Approximately 5.5 ounces