Ebmpapst
Ebmpapst K3G280-AU06-B2 EC Plug Fan
Product Code:K3G280-AU06-B2
Description
Weight11.5 kgMotor size84Size280 mmRotor surfacePainted blackElectronics housing materialDie-cast aluminumImpeller materialSheet aluminumSupport plate materialSheet steel, galvanizedSupport bracket materialSteel, painted blackInlet nozzle materialSheet steel, galvanizedNumber of blades7Direction of rotationClockwise, viewed toward rotorDegree of protectionIP54Insulation classInchBInchMoisture (F) / Environmental (H) protection classH1Max. permitted ambient temp. for motor (transport/storage)+80 °CMin. permitted ambient temp. for motor (transport/storage)-40 °CInstallation positionShaft horizontal or rotor on bottom; rotor on top on requestCondensation drainage holesOn rotor sideModeS1Motor bearingBall bearingTechnical features- Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Input for sensor 0-10 V or 4-20 mA - Alarm relay - Motor current limitation - PFC, active - RS-485 MODBUS-RTU - Soft start - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from supply - Thermal overload protection for electronics/motor - Line undervoltage / phase failure detectionEMC immunity to interferenceAccording to EN 61000-6-2 (industrial environment)EMC circuit feedbackAccording to EN 61000-3-2/3EMC interference emissionAccording to EN 55022 (Class B, household environment)Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system)<= 3,5 mAElectrical hookupTerminal boxMotor protectionThermal overload protector (TOP) internally connectedProtection classI (with customer connection of protective earth)Conformity with standardsEN 61800-5-1 / CEApprovalEAC / CCC
Technical Specifications
| Weight | 11.5 kg |
| Motor size | 84 |
| Size | 280 mm |
| Rotor surface | Painted black |
| Electronics housing material | Die-cast aluminum |
| Impeller material | Sheet aluminum |
| Support plate material | Sheet steel, galvanized |
| Support bracket material | Steel, painted black |
| Inlet nozzle material | Sheet steel, galvanized |
| Number of blades | 7 |
| Direction of rotation | Clockwise, viewed toward rotor |
| Degree of protection | IP54 |
| Insulation class | InchBInch |
| Moisture (F) / Environmental (H) protection class | H1 |
| Max. permitted ambient temp. for motor (transport/storage) | +80 °C |
| Min. permitted ambient temp. for motor (transport/storage) | -40 °C |
| Installation position | Shaft horizontal or rotor on bottom; rotor on top on request |
| Condensation drainage holes | On rotor side |
| Mode | S1 |
| Motor bearing | Ball bearing |
| Technical features | - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Input for sensor 0-10 V or 4-20 mA - Alarm relay - Motor current limitation - PFC, active - RS-485 MODBUS-RTU - Soft start - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from supply - Thermal overload protection for electronics/motor - Line undervoltage / phase failure detection |
| EMC immunity to interference | According to EN 61000-6-2 (industrial environment) |
| EMC circuit feedback | According to EN 61000-3-2/3 |
| EMC interference emission | According to EN 55022 (Class B, household environment) |
| Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) | <= 3,5 mA |
| Electrical hookup | Terminal box |
| Motor protection | Thermal overload protector (TOP) internally connected |
| Protection class | I (with customer connection of protective earth) |
| Conformity with standards | EN 61800-5-1 / CE |
| Approval | EAC / CCC |