Printed Circuit BoardDimensions3U Eurocard (100x160mm), front panel width 20.2mm (4HP), mechanics constructed with respect to EMC requirements, ejector leverSCSI BusBus TypeANSI SCSI Parallel Interface-2 (SPI-2) 16-bit (8-bit by adapter), LVD/SE
LVD (low voltage differential signal) max. 15 devices
SE (single ended) max. 15 devices (16-bit), 7 devices (8-bit)PerformanceUltra2 80MBps
Wide Ultra 40MBps (16-bit), Narrow Ultra 20MBps (8-bit)
Wide Fast 20MBps (16-bit), Narrow Fast 10MBps (8-bit)Connector SCSI_Aexternal connector (front panel) 68-pin HD, screw lock 2-56 UNCConnector SCSI_Binternal connector 68-pin HDtotal SCSI cable lengthlow voltage differential (LVD) mode: Ultra2 SCSI 12m
single ended (SE) mode: Fast SCSI 3m, Ultra SCSI 3m (4 devices), 1.5m (8 devices)Terminationactive termination, automatically disabled when both SCSI connectors are in use, LVD/SE self configuring, termination power fused by Polyswitch 1.25AController ChipI/O processor SYM53C895
pre-fetches of 8 SCRIPTS™ dword instructions minimize PCI bus load
load and store SCRIPTS™ instruction increases performance
includes 4kB internal RAM for SCRIPTS™ instruction storage
optimized block transfers at Ultra SCSI clock rates
816 Byte DMA FIFO
on-chip LVD/SE transceivers, 2kV ESD protection
SCAM (SCSI Configured AutoMatically) Level 1 Funktionalität
target disconnect/reconnect (interrupt)
Symbios TolerANT™ SCSI signal filteringCompactPCI®
BusConnector J132-bit, 33MHz (133MB/s)
32-bit DMA Bus Master (133MB/s)
PCI Burst Mode
3,3V oder 5V InterfacePower ConsumptionConnector J1+5V ±5% 1.5A max. (includes termination power)
+3.3V ±0.3V 130mA max.
+12V ±5% 50mA max. (programming Flash)Temperature
HumidityCommercial Grade VersionOperating temperature 0-70°C
Humidity 5-90% non condensing subject to change without further notice
CS3-FLUTE - Ultra2 SCSI Hostadapter
Ordering InformationAliasOrdering NumberShort DescriptionFLUTECS3-1-FLUTE3U CompactPCI Ultra2 SCSI Hostadapter CR9-1-ADAPTMechanical kit, expands 3U front panel to 6U
