EKF CS5-HORN 3U Compact PCI 2 x 160MBps Dual Ultra160 SCSI Hostadapter
EKF
Product Code: EKF CS5-HORN 3U Compact PCI 2 x 160MBps Dual Ultra160 SCSI Hostadapter
Artikelnummer: CS5-HORN
Brand: EKF
GET OFFER: info@imtek.com.tr
Description for EKF CS5-HORN 3U Compact PCI 2 x 160MBps Dual Ultra160 SCSI Hostadapter
Printed Circuit BoardDimensions3U Eurocard (100x160mm), front panel width 20.2mm (4HP), mechanics constructed with respect to EMC requirements, ejector leverSCSI BusBus Type2 x ANSI SCSI Parallel Interface-3 (SPI-3) 16-bit (8-bit by adapter)LVD (low voltage differential signal) max. 2 x 15 devicesSE (single ended) max. 2 x 15 devices (16-bit), 2 x 7 devices (8-bit)Performance(each Channel)Ultra160 160MBpsUltra2 80MBpsWide Ultra 40MBps (16-bit), Narrow Ultra 20MBps (8-bit)Wide Fast 20MBps (16-bit), Narrow Fast 10MBps (8-bit)Connector SCSI_Xexternal connectors (front panel): dual VHDCI (0.8mm pitch) 68-lead receptacle, shielded, screw lock mechanism, each connector rotated 180° against the other (matching plugs with suitable asymmetric hood profile required if both connectors are engaged)Connector SCSI_Iinternal connector: 68-lead high density socket HDSUB (1.27mm pitch), screw lock mechanism 2-56 UNC, SCSI channel A onlyMaximum SCSI Cable LengthLow Voltage Differential (LVD) mode: Ultra2/Ultra160 SCSI 12mSingle Ended Mode (SE) mode: Fast SCSI 3m, Ultra SCSI 3m (4 devices), 1.5m (8 devices)Terminationactive termination, automatically enabled when board is sensed to be either end of the SCSI bus, LVD/SE self configurated termination power fused by self resetting Polyswitches 1.25A tripController ChipSCSI multi-function controller SYM53C1010maximum aggregated throughput 320MBpsPCI busmaster 64/32-bit (block transfer maximum 532MBps)on-chip LVD/SE transceiver 2kV ESD protectedSCAM (SCSI Configured AutoMatically) level 1 functionalitytarget disconnect/reconnect (interrupt)Symbios TolerANT™ SCSI signal filteringSureLINK™ domain validationAIP Asynchronous Information ProtectionCompactPCI®BusConnector J2Connector J164-bit, 66MHz (532MBps)64-bit, 33MHz (266MBps)32-bit, 33MHz (133MBps)PCI Burst Mode3.3V oder 5V InterfaceLED DisplayFront Panel(each channel)termination poweractivityLVD mode (permanent red light) or SE mode (flashing whenever SCSI Bus Busy active)On-Board(each channel)local terminators activeSingle Ended (SE) modeLow Voltage Differential (LVD) modeserial EEPROM data line accessGPIO4 (channel A: Flash BIOS programming)Power RequirementsConnector J1+5V ± 5% 3A max. (including ext. termination power)+3.3V ±0.3V 0.6A max.+12V ±5% 0.05A max.TemperatureHumidityCommercial Grade Versionoperating temperature 0-70°C (industrial grade temperature range available on request)humidity 5-90% non condensingSoftwareDrivers/BIOSDownloadSymbios/LSI Logic SDMS software for Windows and many other popular operating systems specifications are subject to change without further notice Ordering InformationAliasOrdering NumberShort DescriptionHORNCS5-1-HORN3HE CompactPCI Dual Ultra160 SCSI Hostadapter 33MHz CPCI I/FHORNCS5-2-HORN3HE CompactPCI Dual Ultra160 SCSI Hostadapter 66MHz CPCI I/F CR9-1-ADAPTmechanical kit, converts front panel from 3U to 6U 899.3.1.02external SCSI cable assembly, VHDCI to HD-DSUB, 68-pos., length 1m, asymmetric VHDCI connector 1 899.3.2.02external SCSI cable assembly, VHDCI to HD-DSUB, 68-pos., length 2m, asymmetric VHDCI connector 1 899.3.3.02external SCSI cable assembly, VHDCI to HD-DSUB, 68-pos., length 3m, asymmetric VHDCI connector 1 899.4.010.01external SCSI cable assembly, VHDCI to VHDCI, 68-pos., length 1m, asymmetric VHDCI connectors 1 899.4.020.01same as 899.4.010.01, 2m 899.4.030.01same as 899.4.010.01, 3m1 Whenever both external SCSI channels are in use (front panel mounted dual VHDCI receptacle), the connector style of the external VHDCI cabling set is important. Connectors conforming to the VHDCI standard are provided with an asymmetric cable entrance with respect to the center of the pin rows. However, there are cable assemblies available with symmetric VHDCI connectors, resulting in the effect that the plug partly overlaps the neighbouring VHDCI receptacle. Furthermore, cables must comply with Ultra160 LVD/SE standards.Dual-Port VHDCI Receptacle Shown Together With Asymmetric ConnectorsRecommended Products For EKF
