EKF PC5-LARGO Compact PCI PlusIO CPU Card

GeneralCompactPCI® PlusIO (PICMG® CPCI 2.30) System Slot ControllerForm factor single size Eurocard (board dimensions 100x160mm2)Mounting height 3UFront panel width 4HP (8HP/12HP assembly with optional mezzanine side card)Front panel I/O connectors for typical system configuration (2 x USB3, 2 x DisplayPort, 2 x GbE)Backplane communication via CompactPCI® J1 and J2 hard metric connectorsJ1 Connector for Full CompactPCI® Classic 32-Bit SupportJ2 Connector (UHM high speed) for CompactPCI® PlusIO support (4 x PCIe Gen2, 4 x SATA 3G/6G*, 4 x USB, 2 x GbE)J2 PlusIO configuration allows for either CompactPCI® Serial backplane usage or rear I/O module attachmentOn-board PCIe x 4 Gen2 mezzanine expansion option (side card)On-board SATA x 4 6G mezzanine expansion option for mass storage modules or side cardsOn-board DisplayPort (3rd video output) mezzanine expansion option for side cardsSide cards and low profile mass storage modules available as COTS and also as custom specificProcessor5th Generation Intel® Core™ CPU (Broadwell H)i7-5850EQ • 4 Cores • 2.7GHz (TB 3.4GHz) • 47/37W TDP/cTDP • GT3e-6200 Intel® Iris™ Pro graphics 1GHz • 6MB LLC • vPRO™/AMTi7-5700EQ • 4 Cores • 2.6GHz (TB 3.4GHz) • 47/37W TDP/cTDP • GT2-5600 Intel® HD graphics 1GHz • 6MB LLC • vPRO™/AMTFirmwarePhoenix® UEFI (Unified Extensible Firmware Interface) with CSM*Fully customizable by EKFSecure Boot and Measured Boot supported - meeting all demands as specified by Microsoft®Windows®, Linux and other (RT)OS' supportedIntel® AMT supported (disabled by default, must be enabled via BIOS setup)* CSM (Compatibility Support Module) emulates a legacy BIOS environment, which allows to boot a legacy operating system such as DOS, 32-bit Windows and some RTOS' Main MemoryIntegrated memory controller up to 24GB DDR3L 1600 +ECCDDR3L +ECC soldered memory up to 8GBDDR3L +ECC SO-DIMM memory module socket up to 16GBGraphicsIntegrated HD Graphics Engine, 3 symmetric independent displays3D HW acceleration DX11.1, OpenCL 1.2, OpenGL 4.3, ES 2.0HW media acceleration DXVA 2, VAAPIHW video decode H264, SVC, AVC, MVC, MPEG-2, MJPEG, JPEG large frame support, VC-1, VP8HW video encode H264, SVC, AVC, MVC, MPEG-2Content protection PUMA, PAVP, HDCPFront panel options: Dual Mini-DisplayPort (mDP) or single VGA connector option3rd DisplayPort connector via mezzanine side cardDisplayPort™ 1.2 Multi-Stream Transport (MST) - display daisy chainingMax Resolution 4096 x 2304 @60Hz (any DisplayPort), 1920 x 1200 (VGA)4k x 2k @24Hz supported for Blu-ray playbackIntegrated audioNetworkingUp to 4 networking interfaces in total - 2 x front RJ45 GbE, 2 x backplane GbE via J21000BASE-T, 100BASE-TX, 10BASE-T connectionsFront port 1 - I217LM with Intel® AMT supportFront port 2 - Intel® I210-IT -40°C to +85°C operating temperature GbE NIC w. integrated PHYFront port option M12 X-coded connectors (replacement for RJ45, requires 8HP front panel width)IPv4/IPv6 checksum offload, 9.5KB Jumbo Frame support, EEE Energy Efficient EthernetIEEE 802.1Qav Audio-Video-Bridging (AVB) enhancements for time-sensivitive streamsIEEE 1588 and 802.1AS packets hardware-based time stamping for high-precision time synchronizationBackplane Gigabit Ethernet w. 2 x I210-IT NICChipsetIntel® QM87 Lynx Point Platform Controller Hub (PCH)8 x PCIe Gen2 5GT/s6 x SATA 6G10 x USB2, 4 x USB3LPC, Audio, LegacyOn-Board Building BlocksAdditional on-board controllers, PCIe® based3 x Gigabit Ethernet controllers Intel® I210IT1 x Gigabit Ethernet PHY Intel® I217LMPCIe® to PCI® Bridge PLX 8112PCIe® Gen2 packet switch PLX 8608SATA 3G/6G* RAID controller Marvell® 88SE9230, ARM powered subsystem for host CPU offload* Marvell SATA RAID controller setup for 3Gbps by default - please refer to the PC5-LARGO User Guide SecurityTrusted Platform ModuleTPM 2.0 for highest level of certified platform protectionInfineon Optiga™ SLB 9665 cryptographic processorConforming to TCG 2.0 specificationAES hardware acceleration support by 5th Gen processor 5xxx series (Intel® AES-NI)Front Panel I/O (4HP)2 x Gigabit Ethernet RJ45 (1 = PCH & I217LM - iAMT, 2 = I210IT)2 x DisplayPort (from processor integrated HD graphics engine, mDP style receptacles, optional cable connector retainer available)2 x USB 3.0CompactPCI® & CompactPCI® PlusIO Backplane ResourcesPICMG® CompactPCI® 2.0 CPU card & system slot controller for J1 based 32-bit PCI® systems, 33/66MHzPICMG® CompactPCI® 2.30 J2 UHM connector according to CompactPCI® PlusIOJ2 can be used to enable CompactPCI® Serial peripheral card slots for hybrid systems with a split backplaneJ2 can be used alternatively for a rear I/O moduleJ2 is assigned to 4 x PCIe Gen2 5GT/s (from PCH), 4 x SATA 3G/6G* (from Marvell SATA hardware RAID controller), 4 x USB2 ports (from PCH), 2 x Gigabit Ethernet (I210IT networking controllers)* Marvell SATA RAID controller setup for 3Gbps by default - please refer to the PC5-LARGO User Guide Local Expansion and Mass Storage SolutionsMezzanine side card connectors for optional local expansionP-EXP - 2 x USB 2.0 & Legacy (from PCH)P-DP3 - 3rd DisplayPort video (from Intel® Core™ CPU)P-HSE - 4 x SATA 6G & 4 x USB 2.0 (from PCH)P-PCIE - PCIe Gen2 5GT/s 1 link x 4 lanes or 4 links x 1 lane (from on-board PCIe® switch)4HP Low profile mezzanine module options (to be ordered separately)CFast™ Card with C41-CFAST mezzanine moduleSATA 1.8-Inch Solid State Drive with C42-SATA mezzanine moduleDual mSATA SSD with C47-MSATA mezzanine moduleDual M.2/NGFF SATA SSD 2230 - 2280 size with C48-M2 mezzanine moduleCustom specific module design8HP/12HP Mezzanine side card options (to be ordered separately)PCL-CAPELLA - multi function side cardPCS-BALLET - multi function side cardSCS-TRUMPET - multi function side cardC32-FIO - 2 x COM RS-232, USB, PS/2 (12HP assembly)Variety of other side cards availableCustom specific side card designEnvironmental & RegulatorySuitable e.g. for industrial, transportation & instrumentation applicationsDesigned & manufactured in Germany - ISO 9000 quality management certifiedLong term availabilityRugged solutionCoating, sealing, underfilling on requestLifetime application supportRoHS compliant 2002/95/ECEN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)Operating Temperature: 0°C to +70°COperating temperature -40°C to +85°C (industrial temperature range) on requestStorage Temperature: -40°C to +85°C, max. Gradient 5°C/minHumidity 5% ... 95% RH non CondensingAltitude -300m ... +3000mShock 15g 0.33ms, 6g 6msVibration 1g 5-2000HzMTBF 11.0 years (PC5-480D)RT OS Board Support Packages & DriverLynxOS - on requestOn Time RTOS-32 - on requestOS-9 - on requestQNXReal-Time Linux (RT Patch) - on requestRTX - on requestVxWorks 5.5 & 6.9 - on requestVxWorks 7.0 - under developmentOthers - on request