EKF SC6-TANGO Low Power CPU Card
EKF
Product Code: EKF SC6-TANGO Low Power CPU Card
Artikelnummer: SC6-TANGO
Brand: EKF
GET OFFER: info@imtek.com.tr
Description for EKF SC6-TANGO Low Power CPU Card
GeneralCompactPCI® Serial (PICMG® CPCI-S.0) System Slot ControllerForm factor single size Eurocard (board dimensions 100x160mm2)Mounting height 3UFront panel width 4HP (8HP/12HP assembly with optional mezzanine side card)Front panel I/O connectors for typical system configuration (2 x USB3, 2 x DisplayPort, 2 x GbE)Backplane communication via CompactPCI® Serial connectorsOn-board SATA 6G mezzanine expansion option for mass storage modules or side cardsSide cards and low profile mass storage modules available as COTS and also as custom specificProcessorIntel® Apollo Lake (APL-I) SoC E39xx Seriesx7-E3950 • 4 Cores • 1.6GHz (TB 2.0GHz) • 12W TDP/cTDP • 400/650MHz graphics • 2MB LLCx5-E3940 • 4 Cores • 1.6GHz (TB 1.8GHz) • 9W TDP/cTDP • 400/600MHz graphics • 2MB LLCx5-E3930 • 2 Cores • 1.3GHz (TB 1.8GHz) • 6W TDP/cTDP • 400/550MHz graphics • 2MB LLCGraphics Burst, CPU Burst, Intel® Speedstep®Intel® Virtualization Technology (Intel® VT-x / VT-d)Intel® Trusted Execution Engine (Intel® TXE) 3.0FirmwarePhoenix® UEFI (Unified Extensible Firmware Interface) with CSM*Fully customizable by EKFSecure Boot and Measured Boot supported - meeting all demands as specified by Microsoft®Windows®, Linux and other (RT)OS' supported* CSM (Compatibility Support Module) emulates a legacy BIOS environment, which allows to boot a legacy operating system such as DOS, 32-bit Windows and some RTOS' Main MemoryIntegrated memory controller up to 8GB DDR3L 1600 +ECCCompletely soldered memory for rugged applicationsMass StorageOn-board CFast™ Card socket (SATA based CompactFlash)Option front I/O Micro SD Card socket (SDHC, SDXC), available on requestSPI Flash 128Mbit (UEFI firmware and customer application data)Option e•MMC (embedded MMC 5.0 64GByte soldered)Option low profile mezzanine card C41-CFAST (secondary CFast™ card socket) via P-HSE connectorOption low profile mezzanine card C42-SATA (1.8-inch Micro SATA SSD socket) via P-HSE connectorOption low profile mezzanine card C47-MSATA (dual mSATA SSD module sockets) via P-HSE connectorOption low profile mezzanine card C48-M2 (dual M.2 SATA SSD module sockets) via P-HSE connectorOption 8HP assembly side card PCU-UPTEMPO (dual M.2 SATA SSD module sockets) via P-HSE connectorOption 8HP assembly side card C44-SATA (2.5-inch SATA SSD/HDD) via P-HSE connectorOption custom specific mezzanine board design on requestGraphicsIntegrated HD Graphics Engine, Gen 9 LPDirectX 12.0, OpenCL 2.0 Full Profile, OpenGL 4.3HW video decode H264 L5.2, H.265 HEVC, VP9, MVC, MPEG2, JPEG/MJPEG, VC1, WMV9, VP8HW video encode H264, SVC, AVC, MVC, MPEG-2Content protection PAVP, HDCP 1.42 x DisplayPort front panel connectorsDisplayPort™ 1.2aMax Resolution 4096 x 2160 @60HzNetworkingUp to four networking interface controllers (NIC), 1000BASE-T, 100BASE-TX, 10BASE-T connectionsIntel® I210-IT -40°C to +85°C operating temperature GbE controllers w. integrated PHYIPv4/IPv6 checksum offload, 9.5KB Jumbo Frame support, EEE Energy Efficient EthernetIEEE 802.1Qav Audio-Video-Bridging (AVB) enhancements for time-sensivitive streamsIEEE 1588 and 802.1AS packets hardware-based time stamping for high-precision time synchronizationTwo GbE ports via RJ45 front panel jacks (option 2 x M12-X with mezzanine module P01)Option two GbE ports via backplane connectorAPL SoC I/O Usage4 x PCIe® Gen2 to backplane connectors, by default configured as 4 x 1 links1 x PCIe® Gen2 to PCIe® switch PI7C9X2G606PR 1:5 lanes (to on-board PCIe® devices)1 x SATA 6G to on-board CFast™ SSD card socket - can be used as mass storage and boot device1 x SATA 6G to mezzanine expansion connector P-HSEe•MMC I/F 400MByte/s (HS400) to embedded MMC 5.0 64GByte (ordering option, mass storage device)2 x USB 3.0 to front panel connectors2 x DisplayPort to front panel connectorsSDIO (Micro SD Card) front panel slot (option, available on request)4 x USB2 to J2 backplane connectorLPC, Audio, I2C, 2 x USB2 to mezzanine expansion connector P-EXPLPC to TPM 2.0 module (option)Additional Building BlocksAdditional on-board controllers, PCIe® basedPCIe® Gen2 packet switch PI7C9X2G606PR (6-port, 6-lane)2 x Gigabit Ethernet controllers Intel® I210IT (front panel)Option 2 x Intel® I210IT (via backplane connector)Option dual port SATA 6G controller Marvell® 88SE9170 (to P-HSE mezzanine connector)Option e•MMC (embedded MMC 5.0 64GByte HS400)SecurityTrusted Platform Module (option)TPM 2.0 for highest level of certified platform protectionInfineon Optiga™ SLB 9665 cryptographic processorConforming to TCG 2.0 specificationAES hardware acceleration support (Intel® AES-NI)Front Panel I/O (4HP)2 x Gigabit Ethernet RJ45 (2 x I210IT)2 x DisplayPort (APL SoC)2 x USB 3.0 Type-A (APL SoC)Option Micro SD Card slot (APL SoC)Front Panel I/O (8HP)Option RS-232, Audio, USB w. PCU-UPTEMPO side cardOption 2 x M12 X-coded receptacles for Gigabit Ethernet (as replacement for RJ45)Custom specific front panel and side card designCompactPCI® Serial Backplane ResourcesPICMG® CompactPCI® Serial CPU card (system slot controller)Support for up to four PCIe® based CompactPCI® Serial peripheral boards, Gen2 x1 linksOption PCIe® 1 x4 link (manufacturing option)Option 2 x Gigabit Ethernet (I210IT networking controllers) suitable for star and mesh backplanes4 x USB 2.0Local ExpansionMezzanine side card connectors for optional local expansionP-EXP - LPC, Audio, 2 x USB2, I2C (from APL SoC)P-HSE - 1 x SATA 6G (HSE port 1, from APL SoC)P-HSE - 2 x SATA 6G (HSE ports 2 and 3, from optional PCIe® to SATA controller 88SE9170)P-HSE - 1 x PCIe® (HSE port 1, from APL SoC, replaces SATA channel, manufacturing option)4HP Low profile mezzanine module options (to be ordered separately)CFast™ Card with C41-CFAST mezzanine moduleSATA 1.8-Inch Solid State Drive with C42-SATA mezzanine moduleDual mSATA SSD with C47-MSATA mezzanine moduleDual M.2/NGFF SATA SSD 2230 - 2280 size with C48-M2 mezzanine moduleM.2 PCIe® SSD S20-NVME mezzanine moduleCustom specific module design8HP Mezzanine side card option (to be ordered separately)PCU-UPTEMPO side board w. 2 x M.2 SATA sockets & front I/O2.5-inch SATA SSD/HDD available with C44-SATACustom specific side card designEnvironmental & RegulatoryDesigned & manufactured in GermanyISO 9001 certified quality managementLong term availabilityRugged solutionCoating, sealing, underfilling on requestLifetime application supportRoHS compliant 2002/95/ECEN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)Operating temperature -40°C to +85°C (industrial temperature range)Storage Temperature: -40°C to +85°C, max. Gradient 5°C/minHumidity 5% ... 95% RH non CondensingAltitude -300m ... +3000mShock 15g 0.33ms, 6g 6msVibration 1g 5-2000HzMTBF 11.5 yearsRT OS Board Support Packages & DriverPlease refer to external document 'RTOS Support' (PDF)ApplicationsGeneral low power industrial computing, for x86 based softwareRugged systems (e.g. transportation)Data concentrator, router, gateway, kiosk systems, IoTStand-alone computer (fog computing), scalable via mezzanine I/O expansion optionsSmall modular CompactPCI® Serial systems for expansion with up to four peripheral cardsRecommended Products For EKF
